|
Title: EVO sidestand bypass problem Post by: speedknot on August 31, 2010, 09:58:17 AM I just got around to installing an EVO kickstand bypass on my 01 M750. It was a straightforward install but when I went to start it, it would sputter a bit but never kick over. Anyone else have this issue or have some I idea as to what it might be?
Title: Re: EVO sidestand bypass problem Post by: Howie on August 31, 2010, 11:52:43 AM If the problem was the bypass the bike the starter motor wouldn't operate. Maybe a little more/less choke would help.
Title: Re: EVO sidestand bypass problem Post by: speedknot on August 31, 2010, 12:00:45 PM I think I found the problem. Jeff at Monsterparts gave me the virtual slap in the face and told me I had the neutral harness plugged into the oil pressure sending unit. Same plug, just different function. I need to start drinking again! If anyone has a pic handy of where the neutral switch is on the block, shoot it my way. When I get home tonight, I'll have to take another look for it.
Title: Re: EVO sidestand bypass problem Post by: Chris,desmoworld on August 31, 2010, 02:03:40 PM i will help you out with the important part of our instruction [thumbsup]
(http://www.desmorados.com/shop/catalog/images/anleitung.jpg) the red marked cable is the one you have to looking for ;D dont worry ... not needed to start drinking ... some of our clients do the same mistake, so i marked the cable red [laugh] Good luck Chris Title: Re: EVO sidestand bypass problem Post by: speedknot on August 31, 2010, 02:32:55 PM Thats great Chris. Now I have to just have to brush up on my German. [thumbsup] How come some of the Desmoworld site is in English and other parts are in German? I clicked the English flag but it didnt translate.
|