German Monster on Day of delivery, December 2009.
Bike was new with Streefighter calipers and Titanium-Termis.
(http://img4.werkenntwen.de/photo12/c71e4ca1651ee4c3347f0b4408e5457f/h/0/h0g8az96cpam33349k5i8y31wr1.jpg)
Monster 1100S with some modifications, September 2010.
(http://img11.werkenntwen.de/photo13/204fd4824da6cabba8bb334a4c7a19aa/2/5/25xrmo7xyyku4t7dyqzckfytpt4.jpg)
(http://img16.werkenntwen.de/photo13/204fd4824da6cabba8bb334a4c7a19aa/d/z/dzn30th9og7vxeqefu0cqlq0cm0.jpg)
(http://img11.werkenntwen.de/photo13/204fd4824da6cabba8bb334a4c7a19aa/i/6/i6z5fmaofhbxlfznhhtqnp5kqm4.jpg)
(http://img3.werkenntwen.de/photo13/204fd4824da6cabba8bb334a4c7a19aa/6/d/6dx0tctbz0s1ltkakv74tgq3srs.jpg)
(http://img17.werkenntwen.de/photo13/204fd4824da6cabba8bb334a4c7a19aa/5/l/5lqeuia8960nf93pck208562q8r.jpg)
(http://img7.werkenntwen.de/photo13/204fd4824da6cabba8bb334a4c7a19aa/6/s/6squfqrtjezywjfm4opw2ne3mmz.jpg)
(http://img13.werkenntwen.de/photo12/c71e4ca1651ee4c3347f0b4408e5457f/1/b/1bng7m29eiaxm6utxvtboe23iwd.jpg)
(http://img16.werkenntwen.de/photo12/c71e4ca1651ee4c3347f0b4408e5457f/p/e/pe4d7l2i01rabw2vubjibrn5006.jpg)
(mod edit: Fixed a broken image tag)
JAWOHL! [thumbsup]
where are you at?
I'm in Kaiserslautern
Ausgezeichnet! [thumbsup]
Wunderbar !
Dolph :)
nice mods!!! [beer]
Do enjoy. [wine]
Schön !
I'm not very fond of the bikini-fairing, but this CF one..
Nice bike
ja fein gemacht ... meine ist leider noch nicht fertig ;D
WELL DONE ! [thumbsup]
i can show you only the half bike ... i work on the rest [laugh]
(http://www.desmoworld.com/shop/media/catalog/product/a/p/ap.08.0826com_4_2.jpg)
Abgefahren ! Die sieht ja mal zur Abwechslung gut aus [thumbsup]
VERY NICE
(captions for the language impaired) [cheeky]
More pictures!
(http://img8.werkenntwen.de/photo13/8cc632332bb8a17a47d1ca0cc137c356/3/6/36vrkis91vq9e68oy5ub2e350me.jpg)
(http://img5.werkenntwen.de/photo13/8cc632332bb8a17a47d1ca0cc137c356/s/v/svqxwljy5g6errztf3jgb4zs0ep.jpg)
(http://img6.werkenntwen.de/photo13/8cc632332bb8a17a47d1ca0cc137c356/8/i/8i7395fomkg95seapyc5456lvo9.jpg)
(http://img16.werkenntwen.de/photo13/8cc632332bb8a17a47d1ca0cc137c356/f/i/fi2eofoxtrdix9r0m4c8tcxfpo0.jpg)
(http://img8.werkenntwen.de/photo13/8cc632332bb8a17a47d1ca0cc137c356/l/k/lk0629m9q6xwp1ocyxyemiox8ne.jpg)
That's a lot of CF :o Good work man!! Enjoy your ride [thumbsup]
The next modifications!
(http://img12.werkenntwen.de/photo14/3f05979c21cd39a80be7c6df6533f6b5/6/s/6sjkch2z6b99bezhfy5jxj2ya53.jpg)
(http://img6.werkenntwen.de/photo14/3f05979c21cd39a80be7c6df6533f6b5/e/5/e5sbdt77anlemcrg7tt2iy721bf.jpg)
Thanks to desmoworld!
(http://img13.werkenntwen.de/photo14/3f05979c21cd39a80be7c6df6533f6b5/g/r/gr3n2pyq6n5s1edzunnnrr1cgy8.jpg)
(http://img17.werkenntwen.de/photo14/3f05979c21cd39a80be7c6df6533f6b5/1/x/1xzu4syj87oqc45e8o8zn0ftwuu.jpg)
The result you can see in two weeks!
Really diggin' that CF windscreen - any link?
Keep up the good work
The CF windscreen was from this shop: http://www.wmracingstore.com/index.aspx (http://www.wmracingstore.com/index.aspx)
Die Eier Von Satan!
^ Favorite German phrase. Sweet bike!
Sehr gut!
Vorsprung dorch teknik.....nice
That's what i call loaded man! very nice and clean.
Excellent looking ride
Next pictures
(http://img15.werkenntwen.de/photo14/3f05979c21cd39a80be7c6df6533f6b5/m/w/mwsp8u180qs5myz0oc1tw7o4him.jpg)
(http://img16.werkenntwen.de/photo14/21f22b32a3541e1326b8262af65613e2/w/n/wny4uj8nurxmxngj2r6l0nxo850.jpg)
(http://img13.werkenntwen.de/photo14/21f22b32a3541e1326b8262af65613e2/g/7/g7bimsijdn4hy0yawcj5pu26wad.jpg)
Nice!! I like the no passenger pegs, I really don't want to carry any!!
Next step: tank covers in carbonfibre
(http://img13.werkenntwen.de/photo14/3f05979c21cd39a80be7c6df6533f6b5/g/r/gr3n2pyq6n5s1edzunnnrr1cgy8.jpg)
(http://img17.werkenntwen.de/photo14/3f05979c21cd39a80be7c6df6533f6b5/1/x/1xzu4syj87oqc45e8o8zn0ftwuu.jpg)
(http://img5.werkenntwen.de/photo14/7cc6cdf6488ac5b815717fd126351aab/l/d/ldmq0a7n7h3bjknu69ltbpj8xaq.jpg)
(http://img2.werkenntwen.de/photo14/7cc6cdf6488ac5b815717fd126351aab/j/e/je2xtuvaeakqvi940vug21aez9k.jpg)
Hi,
what brake and clutch lever are these? TWM? Could you post a picture of them?
Thanks (Eigentlich ja 'Danke') Schon witzig wenn sich Germanen in amerikanischen Foren begegnen. ;D
Hallo,
richtig erkannt. Die Hebel sind von TWM.
(http://img2.werkenntwen.de/photo14/4191d75bb902160c712794e7a2320160/f/0/f0vqo5hdtkia86tbv7iyx8uouuk.jpg)
Ah, sieht gut aus. Danke. Ich hab sie mir Ende des Jahres auch bestellt und warte im Moment auf die Lieferung. :-) Gibt's bei der Montage was zu beachten?
Die Montage ist kein Problem.
Bei den kürzeren Weiteneinstellungen trennt die Kupplung leider nicht komplett!
Vielleicht gehts mit dem originalen Hauptzylinder.
I can see that your monster is addicted to C.F, like a crackhead to crack.Very nice bike.
The next mods:
Termi-covers in carbonfibre.
(http://img1.werkenntwen.de/photo14/30916a0043084adb8f6fb215cb575dd2/5/b/5bvno3bpmqb6qvzgpiybarbr6db.jpg)
Front fender modified in D16 GP11 Style.
(http://img13.werkenntwen.de/photo14/30916a0043084adb8f6fb215cb575dd2/h/r/hrozv2fyw00wp47r5rfh9nclhr8.jpg)
i forgot to ask I think, where did you get your carbon engine case guards - the alternator guard and the clutch case guard?
I like the idea of protection there for low-sides, so I am interested.
i just want to reiterate how much "right" i think is going on with your bike. Not constructive criticism, but perhaps something to consider down the road:
Aftermarket brake lines. They really aren't an upgrade from the braided lines that come from the factory now as far as effect on brake lever feel (the old crap lines flexed and bulged before steel braided, so it was quite an upgrade...) The aftermarket brake lines *are* slightly lighter, however (if you need a performance justification), and crazy lighter if you jump to the carbon/kevlar lines
But the idea I was thinking is that it would get rid of the steel banjo fittings that attract dirt/corrosion by going to the lighter billet aluminum fittings in the color of your choice. (Black fittings are really nice because they "disappear" - you don't notice them in a good way. I've had red/blue fittings (Fren Tubo lines) on the project fixxer upper M900, and on my M900 I've had red lines with gold fittings, and recently had to swap front brake lines to accomodate different calipers, so I went with black fittings on smoke (translucent black) lines. The line color is a covering over the braided line part, not the line material.
Here's a shot of the fittings on mine with the smoke lines, black fittings, Ti banjos:
(https://lh6.googleusercontent.com/_4iYlZ1m8UEM/TRk6JmfevgI/AAAAAAAAF4U/Li1BxPlHppI/s400/IMG_1096.jpg)
and the previous setup with red lines and gold fittings (and gold banjo bolt, and silly bleeder screw cover):
(https://lh3.googleusercontent.com/_4iYlZ1m8UEM/SupC-oAmp2I/AAAAAAAAEbI/RVpwZhcGIt0/s400/IMG_1672.JPG)
Mine were from Spiegler-USA, but I'm certain there's somebody local to you that does this as well. (AMS here in Dallas used to cut/make their own for the race bikes and customers with track / race bike setups since caliper and master cylinder technology was quickly changing in the late 90's through early 2000's, and numerous different combinations made it hard to have pre-made kits)
(http://www.spieglerusa.com/images/Spiegler-Brake-Lines_small.jpg)
But again, very little "performance" gain in going this route now-a-days, aside from a slight weight savings. Mostly cosmetic. As they saying goes "The devil is in the details" (And you've nailed every other detail so far!)
Quote from: Raux on September 03, 2010, 09:48:43 AM
where are you at?
I'm in Kaiserslautern
My sister and her boyfriend are living in Kaiserslautern for at least the next year. He's a ducati guy too, but doesn't have one.
New pictures from the complete bike:
(http://img14.werkenntwen.de/photo14/324a3f372725332b45a6264a3d993144/w/v/wvw6buklbgyj25oeun4ifjajc6o.jpg)
(http://img10.werkenntwen.de/photo14/324a3f372725332b45a6264a3d993144/e/h/eh34k9f6kxrv423mmmstpzgbew5.jpg)
(http://img13.werkenntwen.de/photo14/324a3f372725332b45a6264a3d993144/r/s/rsumv1op04pwvq6erbpbyhw6n28.jpg)
(http://img18.werkenntwen.de/photo14/324a3f372725332b45a6264a3d993144/6/5/65e9pl8vpxc104r50pe2t77fzyl.jpg)
(http://img16.werkenntwen.de/photo14/324a3f372725332b45a6264a3d993144/k/5/k5cr9xc1d6e3xjacqlgwepi6930.jpg)
looks awesome man :)
if i ever decide to get the some cf tank covers, i would prob go the same route you did... painting over them and letting the cf show through only in bits. i dont like it when there is too much cf everywhere... makes it look a bit tacky imo. good balance of it on yours ;)
Nice... I like it a lot!
Looks great!!
New wheels! Forged Marchesinis with Pirelli DR2.
(http://img1.werkenntwen.de/photo14/60d8ba7db324bc4ef955ea0eaa16794f/5/f/5f6v4oeej4mg2ntt182wcp1f44b.jpg)
The next parts have arrived.
See the pictures:
(http://img10.werkenntwen.de/photo14/a6b6478c8a7e67f9a68ac9ea8852f7fa/f/2/f2iockbbqr6kbfcfg7v0fpe4ht5.jpg)
(http://img6.werkenntwen.de/photo14/a6b6478c8a7e67f9a68ac9ea8852f7fa/d/a/dak1wu0n04tsfe6oiq7k4jlc4kf.jpg)
(http://img5.werkenntwen.de/photo14/a6b6478c8a7e67f9a68ac9ea8852f7fa/5/b/5b18m1tiuz869d65omcgj6efc0p.jpg)
(http://img2.werkenntwen.de/photo14/a6b6478c8a7e67f9a68ac9ea8852f7fa/e/s/es644uapim5kril8u5b813ta8tk.jpg)
The next pictures:
Black footpegs and swingarm bolts.
(http://img11.werkenntwen.de/photo14/0ef8721893a4708079722660c2fbbbf1/p/2/p2xw2cgwoo4hyvmyrml4y7jwxj7.jpg)
(http://img15.werkenntwen.de/photo14/0ef8721893a4708079722660c2fbbbf1/i/z/izfo1ob8zan2wfsr4zf54jw60ix.jpg)
(http://img14.werkenntwen.de/photo14/0ef8721893a4708079722660c2fbbbf1/v/n/vnu4yyvzi4tormapte7qg2uh8zo.jpg)
The next parts from Desmoworld:
(http://img10.werkenntwen.de/photo14/a321c118317677eafbb14c13518495fd/j/t/jtckpvgi6orp3f7k36ss4t40tfh.jpg)
(http://img9.werkenntwen.de/photo14/a321c118317677eafbb14c13518495fd/3/c/3csstyju8r3mhaub39mdck8pz7n.jpg)
(http://img4.werkenntwen.de/photo14/a321c118317677eafbb14c13518495fd/g/t/gttnwu7geifjnswy427pvu430k1.jpg)
Tank mesh black painted:
(http://img16.werkenntwen.de/photo14/a321c118317677eafbb14c13518495fd/5/y/5yw503rrnda3pqb430iv5auuoc0.jpg)
Yessir bike looks great [thumbsup]
Oh the mod bug....a very serious infliction
See the next modifications:
Superbike grips from pro grip:
(http://img1.werkenntwen.de/photo14/60cc466b9feb426ce9261ae012273d41/0/p/0pbstg0dh9d3obf7gv2k05nrura.jpg)
Fluid tanks from Rizoma:
(http://img18.werkenntwen.de/photo14/60cc466b9feb426ce9261ae012273d41/m/7/m7spjat5uo5bvru45jmg6h64a2c.jpg)
(http://img11.werkenntwen.de/photo14/60cc466b9feb426ce9261ae012273d41/q/w/qwibuy8dxv07dawbzwow1tac617.jpg)
(http://img8.werkenntwen.de/photo14/60cc466b9feb426ce9261ae012273d41/3/n/3n3tovyw3tg4rr9e5o7c8kwexhi.jpg)
(http://img12.werkenntwen.de/photo14/60cc466b9feb426ce9261ae012273d41/o/t/otj0wj6p6lxw9nt0uby4it9xqgv.jpg)
Steering damper from DP (Gubellini) , triple clamp black powdwercoated:
(http://img15.werkenntwen.de/photo14/60cc466b9feb426ce9261ae012273d41/i/0/i0ga3okm0d31mfs4jie0y9pc9hm.jpg)
Headlight relocator from Desmoworld:
(http://img5.werkenntwen.de/photo14/60cc466b9feb426ce9261ae012273d41/7/j/7jihnljlxippmm2ugc01w9bpftp.jpg)
Sehr gut!
Hi 8Ducatis,
I had a look at your Monster last summer in Felix Haselbrinks garden at the Italo-Früstück in Frielingen. Stunning bike.
(http://desmomaniacs.de/pics/cache/vs_11%20Italo-Fruehstueck_P1000533.JPG)
There are some modes very similiar to those I've had done:
(http://files.homepagemodules.de/b564293/resize/800x1000/pictures_u134_27321b.jpg)
Greetings from Kassel
Richie
Hallo Richie,
dein Monster ist auch gut gelungen. Die Felgen hatte ich auch erst in Betracht gezogen.
Viele Grüße aus Alzenau
Roger
Ah, OK, kannst deutsch. [thumbsup]
Hab die Felgen gebraucht geschossen, stammen von ner Hypermotard S.
Quote from: Richie#20 on March 11, 2012, 10:30:40 AM
Hi 8Ducatis,
I had a look at your Monster last summer in Felix Haselbrinks garden at the Italo-Früstück in Frielingen. Stunning bike.
(http://desmomaniacs.de/pics/cache/vs_11%20Italo-Fruehstueck_P1000533.JPG)
There are some modes very similiar to those I've had done:
(http://files.homepagemodules.de/b564293/resize/800x1000/pictures_u134_27321b.jpg)
Greetings from Kassel
Richie
Owah! i found another mechanic he said he will do my bike for $120, he said hes done it before to a bike, but he said he broke only one light out of all of them, so i might have faith in him in handling my sexy beast. etsnet, unless if u can come nearby my house and do it for me and i pay you $50, or i will just let the guy do it for $120, im gonna try and haggle the price down from the guy too. thnx
The next steps for this winter:
(http://img15.werkenntwen.de/media/4c9e5d02da2db674b0c115b150f7170a8a020110.jpg)
(http://img4.werkenntwen.de/media/2437ef215b2ea630dcd555b150f7170a8a020110.jpg)
(http://img12.werkenntwen.de/media/d8fa0611700ee547764a55b150f7170a8a020110.jpg)
(http://img10.werkenntwen.de/media/df9c5123e0e01720d8d9d5b150f7170a8a020110.jpg)
(http://img16.werkenntwen.de/media/ce88b050a5f6c5e30c2cd5b150f7170a8a020110.jpg)
Tangentiale from Arrow
The next steps:
(http://www.monstercafe.de/attachment.php?attachmentid=1216&d=1362505498)
(http://www.monstercafe.de/attachment.php?attachmentid=1066&d=1361028517)
(http://www.monstercafe.de/attachment.php?attachmentid=1134&d=1361637992)
(http://www.monstercafe.de/attachment.php?attachmentid=1137&d=1361638158)
(http://www.monstercafe.de/attachment.php?attachmentid=1138&d=1361638313)
(http://www.monstercafe.de/attachment.php?attachmentid=1139&d=1361638368)
exhaust pipr from arrow
(http://www.monstercafe.de/attachment.php?attachmentid=1171&d=1362241565)
(http://www.monstercafe.de/attachment.php?attachmentid=1172&d=1362241630)
(http://www.monstercafe.de/attachment.php?attachmentid=1173&d=1362241777)
Holy Carbon batman! You have a fibre addiction [beer]
Which clutch cover is that?
This is the same cover.
http://www.ebay.com/itm/370665567637?item=370665567637&pt=Motorcycles_Parts_Accessories&cmd=ViewItem&hash=item564d63b595&vxp=mtr (http://www.ebay.com/itm/370665567637?item=370665567637&pt=Motorcycles_Parts_Accessories&cmd=ViewItem&hash=item564d63b595&vxp=mtr)
But my cover is a little bit modified.
Cool! Thanks, that is quite the reasonable price, too!
See the complete bike.
Pictures from today:
(http://www.monstercafe.de/attachment.php?attachmentid=1262&d=1362847864)
(http://www.monstercafe.de/attachment.php?attachmentid=1263&d=1362847923)
(http://www.monstercafe.de/attachment.php?attachmentid=1264&d=1362847985)
(http://www.monstercafe.de/attachment.php?attachmentid=1265&d=1362848046)
(http://www.monstercafe.de/attachment.php?attachmentid=1264&d=1362847985)
Almost too pretty to ride. :'(
exceptionally clean bike with very tasteful mods [beer]
I still have a hard time showing love for the bikini fairing, it always reminds me of those little silly top hats...
(http://static.zoovy.com/img/girlfriendgalas/W1001-H1001-Bffffff/hats/mini_top_hat_black_with_red.jpg)
but it does look better blacked out in carbon fiber!
Quote from: Stormtrooper on March 10, 2013, 03:09:39 PM
I still have a hard time showing love for the bikini fairing, it always reminds me of those little silly top hats...
Sounds like a personal problem. ;)
Now I'm going to have nightmares, BTW... 8)
Next modifications:
Ohlins-stickers in black:
(http://www.monstercafe.de/attachment.php?attachmentid=4103&d=1382121688)
(http://www.monstercafe.de/attachment.php?attachmentid=4104&d=1382121694)
CNC-parts for Ohlins-damper:
(http://www.monstercafe.de/attachment.php?attachmentid=4105&d=1382121808)
Magnesium valve covers:
(http://www.monstercafe.de/attachment.php?attachmentid=4102&d=1382121544)
Ciao
Roger
looks good, but my 1 suggestion...buy an aluminum Scotts reusable filter and have it anodized black and screw that on there to alleviate that ugly Ducati oil filter....oh and maybe work on those chicken strips a lil by riding the ever loving hell out of it!!!