Hey guys,
Looking to clean up my rotors this weekend. Which side of the scotch-brite pads do you guys use? The tough green side, or the softer yellow? Also, any other uses for the these? Can I scrub my engine block with it?
Scotch-Brite will remove paint.
Not a good choice for painted surfaces.
Never saw a two sided Scotch-Brite. I use the green on the friction surface of the rotor with brake cleaner. If you wouldn't use sand paper, emery cloth or steel wool on a surface don't use a Scotch Brite
[bang] Are you referring to http://www.scotch-brite.com/wps/portal/3M/en_US/Scotch-BriteBrand/Scotch-Brite/Products/Catalog/?PC_7_RJH9U52300V2E0I02BK7KM0GT3_nid=RB57JFL0TNgs7XLWLFJB1BglL1TNXXC74Hbl&prodID=RB57JFL0TNgs&lang=en_US (http://www.scotch-brite.com/wps/portal/3M/en_US/Scotch-BriteBrand/Scotch-Brite/Products/Catalog/?PC_7_RJH9U52300V2E0I02BK7KM0GT3_nid=RB57JFL0TNgs7XLWLFJB1BglL1TNXXC74Hbl&prodID=RB57JFL0TNgs&lang=en_US) or http://www.jamestowndistributors.com/userportal/show_product.do?pid=50 (http://www.jamestowndistributors.com/userportal/show_product.do?pid=50) ?
The second type is what I use on the friction surfaces of the rotors. I use green. They will scratch the carriers.