Print Page - S4rs upper clamp size

Title: S4rs upper clamp size
Post by: toudg on September 13, 2010, 02:51:15 AM

I wanna order the upper clamp from speedymoto for my S4rs. Do I need the 53mm version (superbike conversion one) ? I'm kinda confused ... ???

Thanks for your time !

Title: Re: S4rs upper clamp size
Post by: Bill in OKC on September 13, 2010, 06:22:19 AM

I recently measured my S4Rs for new triples - it was Ohlins Ã˜50-54 upper/lower

Title: Re: S4rs upper clamp size
Post by: toudg on September 13, 2010, 06:37:54 AM

So, its a 50/54 mm, this wont fit since its 53 mm ??

http://www.speedymoto.com/Merchant2/merchant.mvc?Screen=PROD&Product_Code=03-0208BLK53mm&Category_Code=53mm (http://www.speedymoto.com/Merchant2/merchant.mvc?Screen=PROD&Product_Code=03-0208BLK53mm&Category_Code=53mm)

Title: Re: S4rs upper clamp size
Post by: Rameses on September 13, 2010, 08:16:39 AM

Depends.

Have you swapped out your forks for SBK forks or are you running stock forks?

If you have stock forks, no, that won't work.

eta:

If you have stock forks, this's the one you need.

http://www.speedymoto.com/Merchant2/merchant.mvc?Screen=PROD&Product_Code=03-0208BLK&Category_Code=MTC (http://www.speedymoto.com/Merchant2/merchant.mvc?Screen=PROD&Product_Code=03-0208BLK&Category_Code=MTC)

Title: Re: S4rs upper clamp size
Post by: toudg on September 13, 2010, 09:49:09 AM

Thanks a lot, I'm running the stock ones ! [thumbsup]

Title: Re: S4rs upper clamp size
Post by: toudg on September 13, 2010, 09:53:08 AM

Are you guys running a side mount damper with this kit ??

Ducati Monster Forum

Moto Board => Accessories & Mods => Topic started by: toudg on September 13, 2010, 02:51:15 AM