Ducati Monster Forum

i need some pics (preferably of the 696) of some rizoma rearsets with the passenger peg kit installed. i've seen a couple but none of them were good pics. a good side view would be great. most of the ones i've seen are close up shots that dont give a good look as to what the entire bike looks like with them installed.

anyone?

I'm not sure that I've ever seen someone with the passenger pegs installed.  Seems like everyone that gets aftermarket rearsets forgoes them.

www.google.com (http://www.google.com)

(http://cjmoto.com/catalog/PE576B.jpg)

Unless you're dead set on the Rizomas, there are much cheaper and better options out there.

Might want to look into the S&P passenger rearsets that work with any 696/1100 rearsets.

696 rearset thread
http://www.ducatimonsterforum.org/index.php?topic=41545.0 (http://www.ducatimonsterforum.org/index.php?topic=41545.0)

Go with rizoma. Next month adding the passenger peg to my m796.

 

http://www.ducatimonsterforum.org/index.php?topic=39388.0 (http://www.ducatimonsterforum.org/index.php?topic=39388.0)

It's an 1100 but it's got the Rizomas and the passenger rearpegs

i'm set on the rizomas. i just don't love the passenger peg kit but i need it on my bike... i really wanna see some on a 696.  with the dual sided swing arm.

anyone?

My friend has them on his 1100.  I'm not sure when the next time I see him will be, but I will try and snap a pic.  I liked the way they look personally.  I think basically, if you are set on the Rizomas, you could just buy both parts, and install the rearsets.  Then put the pegs on without damaging them so you can check it out in person.  If you don't like it, then just return it.  Also, if you definitely plan on having a passenger, then you kind of have no choice.

you know you can get the rizoma for the rider and the S&P for the passenger. mix and match

you have a pic? my main concern about that is can you install the rizoma rear pegs? if you can install the stock ducati pegs then the rizoma ones i have will fit...

is that what you have for your passenger pegs?

Here's a poor quality photo from S&P facebook

(http://sphotos.ak.fbcdn.net/hphotos-ak-snc1/hs207.snc1/7416_156952567712_152454542712_2761244_3567422_n.jpg)


I have the crossbar mounted, but I have the arms off for now to avoid anyone asking for a ride until I get VERY comfortable with the new riding position.

can you put the stock pegs on the s&p passenger peg mount?

better picture.  

(http://sphotos.ak.fbcdn.net/hphotos-ak-snc4/hs777.snc4/67746_943118929950_919724_51550056_3720712_n.jpg)

it's an 1100, but you get the idea.  Found on their facebook page

no you can't put the stock pegs, but why would you want to?  the stock pegs are junk.

The S&P pegs have MUCH better grip (actually, they're some of the nicest pegs I've used).  Your passenger will thank you.

If you're worried about spares, they aren't expensive through S&P, or with a small change you can use woodcraft's pegs as well

gotta agree on that. it's like stepping on a metal file. you aren't going anywhere.

i wouldn't put the stock pegs on! i think i threw my stock pegs away a long time ago. the reason i ask is i have rizoma pegs front and back. and the passenger rizoma pegs mount exactly like the stock passenger pegs. so if the stock pegs wouldn't mount then my rizomas wont mount. because what i didn't want was rizoma front pegs with rizoma rearests up front and s&p pegs on the rear... i was hoping the s&p's would accept the stock peg mount so i could slap on the rizomas to match the front (if i decide to get the rizoma rearsets)