I'm at work and after thinking about my ride yesterday and the commute this morning I've decided that I'm getting clip-ons again.
I have an '05 m620 with stock forks. I need 50mm clip-ons right?
Thanks.
sac
Yes.
-50mm is diameter at top of fork tube
-53mm is diameter of SBK forks (if you ever do that upgrade)
Quote from: a m on October 11, 2010, 01:46:02 PM
Yes.
-50mm is diameter at top of fork tube
-53mm is diameter of SBK forks (if you ever do that upgrade)
Thank you.
They have been ordered.
$150 including shipping. Decent deal for new parts.
Cheers
sac
Cool. Here's the general rule o' thumb for Ducati's:
Monster - 50mm top, 54mm bottom
SBK Showa - 53mm top, 53mm bottom
SBK Ohlins - 53mm top, 56mm bottom
hope you got woodcrafts. by far the easiest to mount under or ontop of tripple [bacon]
Or..... Drop the triple's down 1.5 inch and then mount on top. Did this to mine and the front holds firm in the turns.
*Disclaimer* - This is not track tested.
Quote from: Latinbalar on October 14, 2010, 09:27:41 AM
Or..... Drop the triple's down 1.5 inch and then mount on top. Did this to mine and the front holds firm in the turns.
*Disclaimer* - This is not track tested.
My front is already dropped about 1.25". I got the Vortex clip-ons. I had their old model on my m750 and liked them. Their new model has substantially slimmer mounts so mounting will be a piece of cake.
Lowering monsters like this really does make them tip into corners pretty quickly.
sac
Quote from: Sắc Dục on October 15, 2010, 01:12:04 PM
Lowering monsters like this really does make them tip into corners pretty quickly.
sac
I've got a picture of your old clip-ons tipping quickly into a corner somewhere... [evil]
;)
[bacon]