|
Title: Monster 796 14t Post by: jfgducat on October 12, 2010, 03:53:52 PM Does anyone know if I need a 525 or 520 front sprocket? I have a monster 796 ,also does anyone recommend any brands? Title: Re: Monster 796 14t Post by: honey_badger on October 12, 2010, 07:52:05 PM Just had the 14t made by Driven installed and put 1200 miles on it this past week. With the stock chain you want the 525. The packaging reads "1067-525-14T Front Ducati M 600".
It's a whole different bike now and I would say the 14t is a must do mod for the monster. The acceleration is much quicker, and shudder is eliminated, plus you can actually use 6th gear. I didn't expect to lose as much off the top end (roughly 8-10mph), but it sure is nice to be able to get to that top end quickly and with ease. I was told by the dealer the 796s are running extremely lean from the factory and the ECU upgrade / termi is also a must do mod to get the most out of the bike. The charcoal filter eliminate/shroud is also shipping now for the 796 and it runs about $25. Title: Re: Monster 796 14t Post by: Raux on October 12, 2010, 09:16:33 PM really the 796 is running a 525 chain?
Title: Re: Monster 796 14t Post by: Howie on October 13, 2010, 06:25:16 AM According to the owner's manual it is a 525 chain.
Title: Re: Monster 796 14t Post by: jfgducat on October 19, 2010, 11:09:26 AM Does anyone have a link, I can not find this damm sprocket
Title: Re: Monster 796 14t Post by: Duc796canada on October 19, 2010, 07:53:22 PM Omaha ducati has a micro fiche parts. Checkout monster parts, they will be able to get you the sprocket. It is a 525 I just did my rear sprocket with a 41T [thumbsup]
|