Hi,
I feel really dumb asking, but Ican't see how to remove the plunger / barrel from the existing brake lever assembly. Once its off the bike I can't get enough clearance to slide the plunger barrel out....any clues [bang]
Ive changed levers on my M1100.... dont remember there being any difficulty?? Tell again to tell me what it is that you cant achieve? Me confused...
http://www.ducatisuite.com/leverchange.html (http://www.ducatisuite.com/leverchange.html) <- instructions.
It should be almost identical on your bike, if not identical.
I did look at that thread, but the barrel / plunger assembly is slightly different to the M1100. The problem was when taking the old levers off, the barrel & plunger which fits into the master cylinder was v.difficult to remove from the old levers.
I was able to prise it off in the end, but its wasn't easy!
Quote from: mickb on October 18, 2010, 03:39:45 AM
I did look at that thread, but the barrel / plunger assembly is slightly different to the M1100. The problem was when taking the old levers off, the barrel & plunger which fits into the master cylinder was v.difficult to remove from the old levers.
I was able to prise it off in the end, but its wasn't easy!
mate; I found the same thing!.. not as easy as my old Monster. I believe when I received my Pazzo levers there was a piece of metal in the box that that allowed it to unlock from the barrel.