Thx
Mine fit perfectly where my emissions canister dealio used to be. Very unobtrusive. The relay was routed near the base of the fuel tank, I believe.
Pay no mind to the funky coloring in the pics...not sure why, don't care. Snapped them just fo you!
(http://i886.photobucket.com/albums/ac67/billyzoom1/P1010998.jpg)
(http://i886.photobucket.com/albums/ac67/billyzoom1/P1010996.jpg)
(http://i886.photobucket.com/albums/ac67/billyzoom1/P1010999.jpg)
Hope it helps.
Joel
here is where I put mine
http://www.ducatimonsterforum.org/index.php?topic=25481.msg445393#msg445393 (http://www.ducatimonsterforum.org/index.php?topic=25481.msg445393#msg445393)
On my M696 I crammed it in behind the shroud where an oil cooler should be but isnt....
(https://farm4.static.flickr.com/3473/3217970686_60d33d107f_b.jpg)
(https://farm4.static.flickr.com/3462/3217970688_6416c4f6a2_b.jpg)
But since my M1100's oil cooler lives in that location I was stumped for a place to mount a Nautilus.... until I dumped the airbox... So it lives - much more vertically orientated - in the vacated area under the tank skins... nicely out of sight.
Terry has his in the same spot as mine, on the left side of the bike.
(https://farm5.static.flickr.com/4083/4963951120_10f2de7b5a_b.jpg)
Fab'd a tab and put it in the where the old one went
(http://i239.photobucket.com/albums/ff57/ohana181/P9270688.jpg)
Quote from: dezmonster on October 23, 2010, 02:41:48 PM
Fab'd a tab and put it in the where the old one went
(http://i239.photobucket.com/albums/ff57/ohana181/P9270688.jpg)
i think this is the winner.. any chance of getting pics of the actual mount?
I mounted mine in this area as well, but tilted the horn down because it is not supposed to be mounted on its side like that. they say you'll only get about a year out of it by mounting it that way. outlets are supposed to be pointing down.
Quote from: Bones on October 23, 2010, 06:07:58 PM
I mounted mine in this area as well, but tilted the horn down because it is not supposed to be mounted on its side like that. they say you'll only get about a year out of it by mounting it that way. outlets are supposed to be pointing down.
Two years and still fukhonkin loud [thumbsup]
Quote from: dezmonster on October 23, 2010, 08:33:24 PM
Two years and still fukhonkin loud [thumbsup]
Don't ride in the rain much, do ya? Mine bit it after it collected sufficient dirt :'(
Quote from: Drunken Monkey on October 23, 2010, 10:12:44 PM
Don't ride in the rain much, do ya? Mine bit it after it collected sufficient dirt :'(
The business end faces back , maybe that helps ?
This is my daily commute motorcycle 17,000 klm in two years of rain,shine,dust ,weekend group rides the lot
steeble is still blowin hard as the day I put it on [thumbsup]
maybe mine was made on a Tuesday ;D
Lost count of how many drivers I have ahhmm ! woken from their inattentive lane changing dangerous
behaviour
best $50 spent on personal safety .
Stebel's installation instructions are pretty specific: The compressor ought be mounted within 15 degrees of vertical.
Out of necessity my 696 was somewhat outside of this. Not sure I'd mount it horizontally though. But then Dezmonster's 2 year field test does seem to indicate that compressor orientation doesnt matter a damn.
Quote from: dezmonster on October 23, 2010, 02:41:48 PM
Fab'd a tab and put it in the where the old one went
(http://i239.photobucket.com/albums/ff57/ohana181/P9270688.jpg)
Same place on my bike... but vertical... using the stock mounting bolt. I didn't have to fab anything.
New bike-new Stebel
and thanks to IndustrialGrrl for the info on where to put it on an S2R1000 [thumbsup](http://i239.photobucket.com/albums/ff57/ohana181/PB300680.jpg)
From a distance it doesn't stand out like dog's balls as in this close up ^
Any ideas on how to mount to a M1100. I have an oil cooler so the 696 idea would not work for me.