So I can't find the damn clutch and brake master perches dor my 99, as the fiches for the 2000 + show that the cylinders mount differently.
Now, there are a ton of brake and clutch masters for ducati on the bay, 696's, 906 pasos, 999, etc, the list goes on and on.
What's the piston size for the brake and clutch, or will any ducati ones work? The only thing I'm worried about is the piston size for the dual caliper setup, wouldn't want to get a cylinder meant for a single, right?
Either ordering a pair of masters, or figuring out a way to mount the damn masters safely.
Fred at http://www.yoyodyneti.com/ (http://www.yoyodyneti.com/) can get you anything Brembo if it is still manufactured and has the expertize to help you. Give him a call. Before calling write down the Brembo numbers on the cylinders to make both your lives easier. He can sell you clamps with or without mirror holes.
Quote from: howie on October 22, 2010, 08:40:03 PM
Fred at http://www.yoyodyneti.com/ (http://www.yoyodyneti.com/) can get you anything Brembo if it is still manufactured and has the expertize to help you. Give him a call. Before calling write down the Brembo numbers on the cylinders to make both your lives easier. He can sell you clamps with or without mirror holes.
make the beast with two backsing fantastic!!! Alright, but which numbers are important? The cast, raised numbers, right? There are the cast numbers and some stamped in numbers, which I assume is the date code or something.
I have recently purchased, from ebay, Aprilia Mille clutch and brake masters. Both fit my S2R and were a cheaper option for getting the coffins off my handle bars.
They are the same as my 02MY 900SS, adjustable levers but with black bodies.
However check for 8mm mirrors as the standard 10mm will not fit.
Quote from: UK_DoubleDuke on October 23, 2010, 03:08:18 AM
I have recently purchased, from ebay, Aprilia Mille clutch and brake masters. Both fit my S2R and were a cheaper option for getting the coffins off my handle bars.
They are the same as my 02MY 900SS, adjustable levers but with black bodies.
However check for 8mm mirrors as the standard 10mm will not fit.
Is there a change in feel, or are the piston sizes the same? I don't need to worry about mirrors too much as I have bar ends.
Quote from: howie on October 22, 2010, 08:40:03 PM
Fred at http://www.yoyodyneti.com/ (http://www.yoyodyneti.com/) can get you anything Brembo if it is still manufactured and has the expertize to help you. Give him a call. Before calling write down the Brembo numbers on the cylinders to make both your lives easier. He can sell you clamps with or without mirror holes.
Copy them all, Fred will know.