I went to the 2010 Motorcycle Film Festival osted by the Cretins MC and noticed when I got there, my brake light was not working... turns out it WON'T go off!....
So I checked the wiring to the rear light first... that checks out. Removed the switch from the front... checked it by depressing the switch..... IT WORKS FINE.... just not while mounted - nothing loose either [bang]
Then I go and check the rear.... no workie. Maybe the rear switch?
Any thoughts/advice REALLY appreciated
There my be some adjustment in the brake switch mounting
Turns out You were correct.... Just came back in to check the board.
I ender up adjusting the micro-switch mount which had developed some play in it.
Rear switch checked out ok too...
Thanks Dan [thumbsup]