Print Page - Monster frame/ engine swap

Title: Monster frame/ engine swap
Post by: tilt on October 29, 2010, 01:04:09 PM

I know anything can be done, but what engines are a direct fit into an s*r frame. I have a little project im starting and want something pre-immobilizer since i really dont want stock gauges. Im leaning towards an older carbie just not sure what i can fit in the frame.

Title: Re: Monster frame/ engine swap
Post by: ducpainter on October 29, 2010, 01:09:59 PM

All the carbies will bolt in with opening up the motor mounts.

You'll need a harness, or modify yours.

I'm not sure, but if you can use an ignitek unit to fire the ignition, you could use any fi motor and add flatslides.

I'd contact ignitek about that.

Title: Re: Monster frame/ engine swap
Post by: greenmonster on October 30, 2010, 04:38:29 AM

Ignitech TCI-P4 has a Bike-Motorbike type choice named Ducati inj. 48-2 for carbs on ie engines.
Download TCI-P4.EXE: http://www.ignitech.cz/english/tcip/tcip.htm (http://www.ignitech.cz/english/tcip/tcip.htm)

Title: Re: Monster frame/ engine swap
Post by: Speeddog on October 30, 2010, 09:32:58 AM

Which S*R frame?

AFAIK, S2R and S4R frames are different, cross-tubes in the area of the throttle-bodies.

Ducati Monster Forum

Moto Board => Tech => Topic started by: tilt on October 29, 2010, 01:04:09 PM