Ducati Monster Forum

Moto Board => Accessories & Mods => Topic started by: cakeman on November 23, 2010, 01:38:55 AM



Title: GoPro HD - Where and how do you mount it?
Post by: cakeman on November 23, 2010, 01:38:55 AM
Hi, ive ordered my GoPro HD Motorsports camera and ordered the roll cage mount. Ive been thinking of places to mount, and seeing as i have 43mm forks, the roll cage mount should fit around the top of the forks and was going to mount there.

Where do you guys mount yours and how?

pics would be great! :)



Title: Re: GoPro HD - Where and how do you mount it?
Post by: Veloce-Fino on November 23, 2010, 09:29:00 AM
I would mount it on the trellis frame below the tank so you can see the forks in action.

Roll cage mount might be too big for the trellis, the bike frame would work better "probably"

Example of this:
Ducati 696 - Test Caméra (http://www.youtube.com/watch?v=cYTbBzZCbos#normal)

This is pretty cool as well, I prefer the side mount though.
DUCATI MONSTER 696 BY TROPIEZO 1 (http://www.youtube.com/watch?v=YHEK3Eebhg4#normal)


Title: Re: GoPro HD - Where and how do you mount it?
Post by: atomic410 on November 23, 2010, 11:15:58 AM
helmet [bacon]


Title: Re: GoPro HD - Where and how do you mount it?
Post by: IdZer0 on November 23, 2010, 12:19:06 PM
helmet [bacon]

Don't you feel windresistance if you place it on your helmet?


Title: Re: GoPro HD - Where and how do you mount it?
Post by: atomic410 on November 23, 2010, 01:13:00 PM
not much.  my monster has 999 body work so i can tuck on the straights but when i race supermoto and ride mx i run it on my helmet and have no problem.  i think it makes the video better because thats what you see.  if i run it on the fender in supermoto or mx theres more sky than anything because of the jumps.  i do run it on the front of both bikes too but its better on the helmet imo[bacon]


Title: Re: GoPro HD - Where and how do you mount it?
Post by: kopfjäger on November 24, 2010, 09:09:15 PM
Here is one mounted on the boot, then chest.  [evil]


KTM 690 SMC  GoPro HD Boot mount  .mp4 (http://www.youtube.com/watch?v=1gKrn14Y-2E#normal)


Title: Re: GoPro HD - Where and how do you mount it?
Post by: Airborne on November 26, 2010, 03:00:58 PM
give it to your lady friend

10-10-2010 (http://www.youtube.com/watch?v=B0AFDA8JEow#normal)


Title: Re: GoPro HD - Where and how do you mount it?
Post by: jabuan on November 27, 2010, 03:46:53 PM
i used the suction cup mount and put it on my tank. didn't work too well. it wasn't the most secure.

i've also used the chest strap, and that's pretty cool. haven't edited the footage yet though.

A Leisurely Stroll Through Tantalus / Round Top Dr. (http://www.youtube.com/watch?v=eA7_yUIz57I#normal)


Title: Re: GoPro HD - Where and how do you mount it?
Post by: cakeman on November 27, 2010, 10:04:27 PM
i used the suction cup mount and put it on my tank. didn't work too well. it wasn't the most secure.

i've also used the chest strap, and that's pretty cool. haven't edited the footage yet though.

A Leisurely Stroll Through Tantalus / Round Top Dr. (http://www.youtube.com/watch?v=eA7_yUIz57I#normal)

Thats a great tune on your vid... had a search for instrumental icons and its all thins rap stuff... doesnt sounds anything like that song on your video... what is it?


Title: Re: GoPro HD - Where and how do you mount it?
Post by: Grrrly on November 28, 2010, 05:10:34 AM
this isn't me, but this guy is using the chest harness to mount his GoPro.  For street riding, this is a good option, as it should be easier to get to the controls.

Ducati Monster 796 - Seven Lakes Drive Part 1 (http://www.youtube.com/watch?v=2vUv9lFasAU#normal)

 


Title: Re: GoPro HD - Where and how do you mount it?
Post by: DucHead on November 28, 2010, 05:37:07 AM
My (very boring) maiden voyage with the GoPro mounted on the tank.  No problems with stability...
PICT0001 (http://www.youtube.com/watch?v=InTAECPUzCw#normal)


Title: Re: GoPro HD - Where and how do you mount it?
Post by: jabuan on November 29, 2010, 12:11:04 AM
Thats a great tune on your vid... had a search for instrumental icons and its all thins rap stuff... doesnt sounds anything like that song on your video... what is it?
if you're referring to just the first song, it's "the melee" by the beastie boys.


Title: Re: GoPro HD - Where and how do you mount it?
Post by: lofty55 on December 02, 2010, 05:39:02 PM
Ive seen kits that come with longer screws that attach to the top of the tank.... you know... where you put gas in. Ive seen them on other bikes but not the monsters... im guessing it wouldnt be too hard to fab a bracket and get longer screws. my .02


Title: Re: GoPro HD - Where and how do you mount it?
Post by: Veloce-Fino on December 02, 2010, 06:47:06 PM
Ive seen kits that come with longer screws that attach to the top of the tank.... you know... where you put gas in. Ive seen them on other bikes but not the monsters... im guessing it wouldnt be too hard to fab a bracket and get longer screws. my .02

Those mounts always made me nervous. If you happen to go over the handlebars you just might get castrated in the process.


Title: Re: GoPro HD - Where and how do you mount it?
Post by: cakeman on December 03, 2010, 09:37:53 PM
I received my handlebar attachment today. Put it on the frame on the horizontal piece, but i get mainly radiator cap and i cant see the clutch lever or handlebar like most of the others are getting.. im running it on 720p at 30fps

Do i have to go further back.. the only place to really go is back and slightly infront and above the clutch.... but i can se me leg bumping it there.....

This is what im getting (just an image)

(http://i728.photobucket.com/albums/ww283/alosurdo/Screenshot2010-12-04at43020PM.png)


Title: Re: GoPro HD - Where and how do you mount it?
Post by: sebastienb on February 25, 2012, 06:53:31 AM
my monster has 999 body work

Can you share a pic of your monster ?


Title: Re: GoPro HD - Where and how do you mount it?
Post by: DarkStaR on March 04, 2012, 10:32:11 PM
Camera vibrated too much on the handle bars for me.

Handle bar kit mounted to the frame slider mount...plus a zip tie (and rubber grommet) to help with vibration...and just incase the mount fails...

(http://i4.photobucket.com/albums/y126/hundredpercentkill/dmf/82149e7d.jpg)
(http://i4.photobucket.com/albums/y126/hundredpercentkill/dmf/ScreenShot2012-03-04at102857PM.png)


SimplePortal 2.1.1