|
Title: Quick question on a 14 tooth sprocket swap on a 696... Post by: loopsrider on February 13, 2011, 06:05:14 PM Did a search and didn't find an answer... Getting ready to do some work to the bike and was wondering if the OEM chain needs shortened when installing a 14 tooth sprocket on a 2010 M696? Just wondering if I should be ordering up a rivet tool. thx... [beer] Title: Re: Quick question on a 14 tooth sprocket swap on a 696... Post by: Buckethead on February 13, 2011, 06:14:38 PM Nope.
One tooth equals just shy of 16mm of overall chain length. Since you take slack from both the top and bottom chain, that means your rear wheel will have to move back 7mm and some change to keep the same tension. Unless your chain is at the very end of its life and stretched to the max, I think you should be good. [beer] Title: Re: Quick question on a 14 tooth sprocket swap on a 696... Post by: loopsrider on February 13, 2011, 08:03:29 PM Nope. One tooth equals just shy of 16mm of overall chain length. Since you take slack from both the top and bottom chain, that means your rear wheel will have to move back 7mm and some change to keep the same tension. Unless your chain is at the very end of its life and stretched to the max, I think you should be good. [beer] Thanks bud!! [thumbsup] |