Ducati Monster Forum

Moto Board => Tech => Topic started by: Jdan on March 06, 2011, 09:19:43 AM

Title: Ca-Cyclworks Mtt43 Tank
Post by: Jdan on March 06, 2011, 09:19:43 AM
Hey guys, I was wondering if anyone had experience with ca-cycloworks' Carbed Monster tank. I removed the original and am not sure which outlet belongs to which hose as nothing is marked on the new tank.

http://imgur.com/LZiGN?full&size=l (http://imgur.com/LZiGN?full&size=l)

Sorry for poor image quality. There is a 90 line on the left of the plate, a straight on the right, and a third off to the side, along the tank.

Thanks
Title: Re: Ca-Cyclworks Mtt43 Tank
Post by: erkishhorde on March 06, 2011, 09:32:58 AM
Email Chris at CA-Cycleworks or call them. They're great at answering questions about their products.
Title: Re: Ca-Cyclworks Mtt43 Tank
Post by: Düb Lüv on March 06, 2011, 11:48:20 AM
The one output that's not on the flange is the breather.the other end of it is by the gas cap.

On the flange, the middle one is obviously the fuel level sensor. If the tank is flipped over and looking at bottom, the right one is the recirculate and left goes to the fuel filter than fuel shutoff.