Print Page - Immobilizer Light on after ECU flash

Title: Immobilizer Light on after ECU flash
Post by: gr1976 on March 20, 2011, 04:18:29 PM

I got my flashed ECU back this weekend (S2R1000 race map, immobilizer removed) and after I installed it noticed the amber light is still blinking on the dash. Does this mean the immobilizer is still active?

Is there a way to verify that it has been disabled? I think I read on here to disconnect the gauges and try to start it but could not find the thread.

Thanks

Title: Re: Immobilizer Light on after ECU flash
Post by: jc.cyberdemon on March 20, 2011, 07:03:13 PM

mine still flashes too... i unplugged the gauges and the bike still fires up, pretty sure that means the immobilizer has been removed. also only using the black key if that matters.

Title: Re: Immobilizer Light on after ECU flash
Post by: muskrat on March 20, 2011, 09:14:35 PM

who did your reflash?

Title: Re: Immobilizer Light on after ECU flash
Post by: gr1976 on March 21, 2011, 07:59:00 AM

Desmo Porshe did the flash. I called them this morning and they said they leave the light on so it looks like the immobilizer is active. I am going to verify by unplugging the gauges. Id rather find out in the garage than 100 miles away fom home.

Title: Re: Immobilizer Light on after ECU flash
Post by: Artful on March 21, 2011, 08:22:00 AM

They are correct, the light still flashes but there is no immo.

Ducati Monster Forum

Moto Board => Tech => Topic started by: gr1976 on March 20, 2011, 04:18:29 PM