Print Page - Handlebar top plate

Title: Handlebar top plate
Post by: hackers2r on March 30, 2011, 07:36:15 PM

I posted about this about a year ago and never got any response. I had seen someone make a cool top plate for the handlebars. Since I'm running clip-ons, I'm looking for something to cover up the naked holes that are left. Thanks. Looking for something simple and possible engraved with a Ducati logo.

Title: Re: Handlebar top plate
Post by: tankerbutt on March 30, 2011, 07:49:25 PM

I did this...

(http://farm3.static.flickr.com/2447/3900836929_023e58b2b6.jpg) (http://www.flickr.com/photos/29753685@N02/3900836929/)HPIM0471 (http://www.flickr.com/photos/29753685@N02/3900836929/#) by ducatiduck85 (http://www.flickr.com/people/29753685@N02/), on Flickr

Title: Re: Handlebar top plate
Post by: hackers2r on March 30, 2011, 07:50:39 PM

OK...how

Title: Re: Handlebar top plate
Post by: Turf on March 31, 2011, 03:24:52 AM

original handlebar clamp without the risers

Title: Re: Handlebar top plate
Post by: jc.cyberdemon on March 31, 2011, 06:16:22 AM

<check some of the sponsors pages to the left

monsterparts sells these..http://www.monsterparts.com/pc/03-0215/Bar-Acc/03-0215.html (http://www.monsterparts.com/pc/03-0215/Bar-Acc/03-0215.html)

Title: Re: Handlebar top plate
Post by: tankerbutt on April 01, 2011, 03:46:05 PM

Quote from: Turf on March 31, 2011, 03:24:52 AM
original handlebar clamp without the risers

close... had some custom spacers made (probably only about 1/2" tall) to clear the bolt in the middle of the triple, and had DUCATI engraved by a local machine shop, all for less than $50. Not too shabby IMO

Title: Re: Handlebar top plate
Post by: The Bearded Duc on April 01, 2011, 04:14:46 PM

Monsterparts also sells these...

http://www.monsterparts.com/pc/CLAMPBOLTS/ACC_MISC/CLAMPBOLTS.html (http://www.monsterparts.com/pc/CLAMPBOLTS/ACC_MISC/CLAMPBOLTS.html)

Ducati Monster Forum

Moto Board => Accessories & Mods => Topic started by: hackers2r on March 30, 2011, 07:36:15 PM