While showing off the termis at a meeting up with friends for a bite to eat, i noticed my left termi had a missing bolt (the ont he goes directly into the slip on) and the other was loose.
no idea how this happened, and im a little surprised
anyone know what bolt it is off hand? i know i could:
a) contact termi or a dealer to get another
2) take another one out and go buy a matching one (this would also be smart to check the others)
but im being lazy, im literally in slippers.
thanks in advance
Do you mean a rivet fell out? Are you talking about the canister?
could you post a pic?
Quote from: rockaduc on April 08, 2011, 02:18:29 AM
Do you mean a rivet fell out? Are you talking about the canister?
could you post a pic?
i can post a pic tonight maybe, the hanger brackets come down from the subframe, then there are two bolts from that that dive straight into the termis, in the middle of the pipe.
ill get pics... lol
Quote from: DucatiTorrey on April 08, 2011, 03:56:53 AM
i can post a pic tonight maybe, the hanger brackets come down from the subframe, then there are two bolts from that that dive straight into the termis, in the middle of the pipe.
ill get pics... lol
Are they same size bolts as the stock pipes? If so, and assuming you still have the stock pipes remove and use said bolt. Unless those are the stock bolts and you had to reuse them for the termis.
Quote from: DucNaked on April 08, 2011, 06:04:55 AM
Are they same size bolts as the stock pipes? If so, and assuming you still have the stock pipes remove and use said bolt. Unless those are the stock bolts and you had to reuse them for the termis.
i dont remember if they are the same bolts.
here is a picture.
(http://farm6.static.flickr.com/5145/5601103341_e7e3b39e37_b.jpg)
I'd try to match with the stock hardware first. When I installed my Termi's, i re-used many stock pieces to mount.
Just take one of the others out and match it at your local auto parts store.