|
Title: Brake/Clutch Lever Compatibility Post by: csorin on April 19, 2011, 09:15:57 AM Looking at upgrading my 620 coffin reservoirs with a set of goldlines from an 05 S4R. The S4R masters are coming sans levers, and I'm wondering if I can use my 620 levers with them. The levers I have look like the older 748/996 adjustables with the rotating dial.
I'm pretty sure the pivot sizes are different on these setups, but maybe I'm alright placing a sleeve or something in my larger diameter levers? Title: Re: Brake/Clutch Lever Compatibility Post by: stopintime on April 19, 2011, 09:24:22 AM Pivot size is different, yes.
I believe the lever ratio, distance from pivot to plunger, is different too. Not forgetting the micro switch tabs, which are different (?) So...... the answer is no - you can't recycle the coffin levers. (I'd be happy if proven wrong) Title: Re: Brake/Clutch Lever Compatibility Post by: csorin on April 19, 2011, 09:51:36 AM Hmmm, looks like I need to start searching for some levers.
Title: Re: Brake/Clutch Lever Compatibility Post by: stopintime on April 19, 2011, 09:53:34 AM Hmmm, looks like I need to start searching for some levers. That's going to be fun, isn't it 8) |