Print Page - Taller seat for an 04 620

Title: Taller seat for an 04 620
Post by: csorin on April 19, 2011, 09:30:02 PM

After looking at Ducati Omaha's OEM parts diagrams, it seems every Ducati has a different seat part number.

04 M620: 595.2.020.3C
08 M695: 595.2.020.3D
04 M800: 595.1.036.2B
04 M1000: 595.1.036.2A
05 S2R: 595.1.036.3A
05 S4R: 595.1.036.3A

I'm looking to replace my stock 620 seat with a taller unit. Another forum member is selling an 05 S4R seat, and I'm wondering if it will be compatible with my 04 620. Are the latches similar?

The diagrams seem to imply that the S2R/S4R units don't have a pin latch. Can the pin latch be attached to the S2R/S4R models?

Title: Re: Taller seat for an 04 620
Post by: DucRS on April 19, 2011, 10:22:47 PM

I interchange 4 different seats between my 08 S4RS and my wife's 05 620, depending on what type of riding I'll be doing that day and the latches match up perfectly.

I don't think you'll have a problem.

Title: Re: Taller seat for an 04 620
Post by: csorin on April 20, 2011, 11:50:06 AM

Ah right on. Do all the different seats line up properly with the tank cut-out?

Title: Re: Taller seat for an 04 620
Post by: JEFF_H on April 20, 2011, 11:57:55 AM

93-99 are different
anything else should work (except the 696-796-110 of course)

Title: Re: Taller seat for an 04 620
Post by: Slide Panda on April 20, 2011, 12:28:06 PM

04 M620: 595.2.020.3C
08 M695: 595.2.020.3D
04 M800: 595.1.036.2B
04 M1000: 595.1.036.2A
05 S2R: 595.1.036.3A
05 S4R: 595.1.036.3A

- the first 7 digits (in green) are the important part here. All monster seats from 2000 until the 696 are interchangeable. The factory seat on the 620 and 695 Monsters were lower than all the rest

Title: Re: Taller seat for an 04 620
Post by: TJR178 on April 21, 2011, 10:59:28 AM

Sargent seats are a bit taller, and light-years more comfy.

Ducati Monster Forum

Moto Board => Accessories & Mods => Topic started by: csorin on April 19, 2011, 09:30:02 PM