Text only | Text with Images

Ducati Monster Forum

Moto Board => Accessories & Mods => Topic started by: polivo on April 22, 2011, 03:06:46 PM

Title: How do you replace front fender on m1100 or 696 or 796??
Post by: polivo on April 22, 2011, 03:06:46 PM
How do you replace front fender on m1100 or 696 or 796??  The brake line is held in place by the plastic holder which i can get off and transfer to the new folder?? is that a rivet?
Title: Re: How do you replace front fender on m1100 or 696 or 796??
Post by: Raux on April 22, 2011, 03:49:59 PM
ignore the plastic holder, get a new one, or drill out the rivet
Title: Re: How do you replace front fender on m1100 or 696 or 796??
Post by: Bishamon on April 23, 2011, 04:00:27 AM
My replacement fender included the brake line holder; I just had to use a torx key to take out the screw and then I used the same torx screw to fasten the 'flap' on the new fender.

If your replacement fender does not have a brake line holder, then see the previous post.  :)
Title: Re: How do you replace front fender on m1100 or 696 or 796??
Post by: DucatiTorrey on April 23, 2011, 07:35:57 AM
which fender are you going with?
Title: Re: How do you replace front fender on m1100 or 696 or 796??
Post by: polivo on April 23, 2011, 07:54:05 AM
I bought a black carbon fiber piece
Title: Re: How do you replace front fender on m1100 or 696 or 796??
Post by: MonsterRider on April 25, 2011, 05:47:27 AM
Definately held on with a rivet.  Refer to the spare parts guide drawing 38.  Download it from the Ducati site.  Invaluable for figuring out how the bike is put together.

http://ducati.com/services/maintenance/index.do (http://ducati.com/services/maintenance/index.do)
Text only | Text with Images