Print Page - Just tunned the throttle bodies with my home made manometer :D

Title: Just tunned the throttle bodies with my home made manometer :D
Post by: desmodoktor on April 24, 2011, 06:09:16 PM

(http://a1.sphotos.ak.fbcdn.net/hphotos-ak-snc6/223231_10150570731490113_579190112_18426390_6954848_n.jpg)

20ft of tube from home depot
9 stick ons + 9 Straps
a piece of wood or smth similar.. i used the back of the mirror i have in garage :D
and a little bit of antifreeze/coolant..
it works great and will save you money!
it took me 5min to build it and it works great!

Title: Re: Just tunned the throttle bodies with my home made manometer :D
Post by: Dietrich on April 24, 2011, 11:28:46 PM

Nice work!

Title: Re: Just tunned the throttle bodies with my home made manometer :D
Post by: 671M900 on April 25, 2011, 03:22:06 AM

sweet! I use ATF myself, as it gets a more accurate reading, and if it somehow gets into the cylinder, it's not gonna hurt.

Title: Re: Just tunned the throttle bodies with my home made manometer :D
Post by: battlecry on April 25, 2011, 07:27:43 AM

Red's faster too. ;D

Title: Re: Just tunned the throttle bodies with my home made manometer :D
Post by: pennyrobber on April 25, 2011, 08:43:08 AM

I think the best part of using antifreeze for this is, after your done, you can drink it! ;D

I don't condone the drinking of antifreeze and it will likely kill you.

Ducati Monster Forum

Moto Board => Tech => Topic started by: desmodoktor on April 24, 2011, 06:09:16 PM