|
Title: Countershaft sprocket reinstall Post by: Grappa on June 15, 2008, 03:36:42 PM Removed my countershaft sprocket and was wondering if there is a torque value for the bolts on the retaining plate. I have a 2001 M900 with the floating style front sprocket. Was also wondering if Napa Blue threadlock will be good enough for those bolts, or should I use the stronger Red version. Thank you kindly! ;D
Title: Re: Countershaft sprocket reinstall Post by: Slide Panda on June 15, 2008, 05:50:43 PM I've got the factory manual for the '00 900. It describes 5nM and 'lock 1' for those. Lock 1 is a low strength thread lock.
So basically, hand tight and loc-tite blue. Mine also have lock washers Title: Re: Countershaft sprocket reinstall Post by: Grappa on June 15, 2008, 06:53:02 PM I've got the factory manual for the '00 900. It describes 5nM and 'lock 1' for those. Lock 1 is a low strength thread lock. So basically, hand tight and loc-tite blue. Mine also have lock washers Thank You! I mean, Thank Yuu! |