Print Page - 09 696 O2 sensor bung size.

Title: 09 696 O2 sensor bung size.
Post by: Veloce-Fino on June 12, 2011, 07:21:59 PM

Any idea what the thread pitch and diameter of the 02 sensor on an 09 696 is?

I'm just getting around to removing the 02 sensors on my bike after the reflash.

My local store didn't have any bung plugs (lol) so I can't just buy and try. I'll have to buy one online.

Looked up the 02 sensor on OEM parts list, dimensions are not listed.

Title: Re: 09 696 O2 sensor bung size.
Post by: 2-Skinny on June 12, 2011, 07:49:03 PM

m18x1.5

Title: Re: 09 696 O2 sensor bung size.
Post by: 2-Skinny on June 12, 2011, 07:50:02 PM

I had the Ducati parts guy look up an oil drain plug off an older bike that was the same size (without magnet) and got a pair of them for $2.75 each.

Title: Re: 09 696 O2 sensor bung size.
Post by: Veloce-Fino on June 12, 2011, 09:08:35 PM

Wait, you mean for the exhaust bung, where the O2 plugs in, is m18x1.5.

*looks about right. I'm going to buy 2 and hope they fit. $3 a piece, $4 to ship ???

Title: Re: 09 696 O2 sensor bung size.
Post by: 2-Skinny on June 12, 2011, 09:29:24 PM

Yes, I mean for the tapped holes where the oxygen sensors go (went). I didn't save the packaging and didn't ask what bike they came off of, but got them from A & S Cycles here in Sacramento (Roseville). They worked on DoWorkSon's 696.

Title: Re: 09 696 O2 sensor bung size.
Post by: Veloce-Fino on June 12, 2011, 09:30:20 PM

Awesome man, thanks.

Title: Re: 09 696 O2 sensor bung size.
Post by: 2-Skinny on July 03, 2011, 04:45:23 PM

You probably worked it out, but just found the part number if anyone else needs the same thing:

BMW (moto) part number: 07119919143

http://www.bmwmcchattanooga.com/products/BMW-Motorcycles/K/Plug--screw-plug/1024044/07119919143.html (http://www.bmwmcchattanooga.com/products/BMW-Motorcycles/K/Plug--screw-plug/1024044/07119919143.html)

Title: Re: 09 696 O2 sensor bung size.
Post by: Veloce-Fino on July 03, 2011, 04:54:26 PM

Thanks!

I got a set off fleabay for $2 and they fit great.

Your size was correct.

m18x1.5

Ducati Monster Forum

Moto Board => Tech => Topic started by: Veloce-Fino on June 12, 2011, 07:21:59 PM