Print Page - Wiring LEDs into the frame

Title: Wiring LEDs into the frame
Post by: redxblack on June 14, 2011, 06:55:28 PM

I'm going to add some amber LEDs into the trellis frame of my 2000 m900. The only issue is I'm not sure where to put them in. Has anyone done this, and if so, at what point did you patch them in? I am going for subtle to help with side visibility since my bike has had the reflectorectomy. I'm not going for a neon look.
Cheers, thanks.

Title: Re: Wiring LEDs into the frame
Post by: duc_fan on June 16, 2011, 12:25:03 PM

Do you want to know where to physically place the lights, or where to tap them in for power?

Title: Re: Wiring LEDs into the frame
Post by: redxblack on June 27, 2011, 11:03:29 PM

Thanks! I'll try to get them in tomorrow. I wanted to figure a non-invasive way to tap in. Cheers guys!

Title: Re: Wiring LEDs into the frame
Post by: the_Journeyman on June 28, 2011, 07:51:53 AM

I ran mine on their own circuit so I could turn them off during the day. It was a pain with all of the extra wires, but it was also on an SS so I could hide the wires easily.

JM

Ducati Monster Forum

Moto Board => Tech => Topic started by: redxblack on June 14, 2011, 06:55:28 PM