I am going to order one or two. They are â,¬110 each plus shipping, that's $145+exchange cost (about 3-4%). Shipping is the same if I get up to 4 or 5.
If you're interested, let me know. There is plenty of info here and on TOB and on BikeBoy's website.
These are for carbie bikes only. Plug and play functionality.
http://ignitech.cz/english/aindex.htm (http://ignitech.cz/english/aindex.htm)
TCIP4 programming software:
http://ignitech.cz/key/40%20tcip4/tcip4.exe (http://ignitech.cz/key/40%20tcip4/tcip4.exe)
EDIT 2/21/2012
I moved this to the General board to see if we can get the number up. I was only doing it for the CAM area. If you aren't local, the cost to ship to you will be about $7. That is a small flat rate box + insurance + tracking.
Apparently there is a 15% discount for quantity so figure that into the price.
If you have a bike with the older Bosch ignition (Pantah/bevel) they can be used too.
I have this unit on my 900SS and it's pretty amazing. Comes plug-and-play ready to run, and you can tweak the advance curve. You can also add a retard function if you add a TPS (use FCRs with the TPS or pick up a set of CV carbs from a Yammy TDM). You can download their software at the link above and fiddle with it to see how many parameters you can tweak.
I can post plenty of info about them, they are pretty amazing.
http://bikeboy.org/ducati2vignition.html (http://bikeboy.org/ducati2vignition.html)
They also have an EFI control unit for Magnetti Marelli IAW5.9 and IAW5.AM
http://ignitech.cz/english/ignijet/ducati/ignijet_2007_ducati.htm (http://ignitech.cz/english/ignijet/ducati/ignijet_2007_ducati.htm)
Interested! [evil]
interested also.
shipping is getting cheaper.
if i can get 3 confirmed YES then i'll take $20 from each of you and make the order.
Do you prefer Dollars or Euros? ;D
Either way I'm in. [thumbsup]
Reviving an old thread: I'm a definite "in" on purchasing a tcip4 , so just wanted to know if anyone else is interested.
I've contacted Ignitech and they will offer a 15% discount if 2+ units are ordered so there's another incentive to jump in. [thumbsup]
count me in on a TCIP4 for sure.
If this is still happening.. I'm in for a TCIP4.
I'm closing this on March 15.
So far I have :
Speedog 1
xcaptainxbloodx 1
gwjcat 1
Pepe 1
Ducatiz 2
pantaheads-radocal 1
pantaheads-jim 1
That's 8 total. I might figure on getting 9 just for s&g. I am also ordering extra wiring looms for myself.
I assume everyone besides me wants the kokusan wiring and not the bosch wiring (pantahs/bevels). If you want BOSCH wiring for an older bike, please let me know asap.
The Kokusan wiring is for every Ducati after about 91-92 with carbs. The Bosch BTZ ignition is on the 1970-1980 bikes i.e. bevels and pantahs.
Confirming: Kokusan wiring please for my TCIP4.
I'll be sending out a notice to you, please PM your email address.
For deposit, you'll pay your share of the shipping plus the domestic shipping. I don't have the full quote, but I think the shipping from Europe is going to run around â,¬70-80 total, so you figure â,¬10 each (about $13 plus another $7 for USPS priority + insurance), so your deposit will be a minimum of $20.
PM sent.
Closing the buy March 15. I'll send out requests for deposits then.
iz
Have you come up with a final delivered price?
Quote from: ducpainter on March 02, 2012, 10:43:55 AM
Have you come up with a final delivered price?
It depends on how many I get, at this point I have 8 confirmed and that is â,¬110 each plus â,¬9 each for shipping to the US, and then another $6-7 for priority shipping inside the US.
if I can get a 2 more, I can get the price down another â,¬10 per unit and the shipping is the same.
doesn't have to be the TCIP4, it can be the IgniJet too, they give the discount based on the number of units sold.
I've got some checking to do, but I'm likely in on this
<Edit>
I'm in for two
I have 5 days left on a module I bid for on ebay. If I don't win, I'm in! Not likely that I'll win sense I only bid 70 bucks. I would rather have this new system. Will I need one or two to convert the system over?
Quote from: jamesmacysanborn on March 04, 2012, 06:11:02 AM
I have 5 days left on a module I bid for on ebay. If I don't win, I'm in! Not likely that I'll win sense I only bid 70 bucks. I would rather have this new system. Will I need one or two to convert the system over?
I believe you need one, but someone morre knowledgable than I can give a more definite answer.
One unit does the bike.
Quote from: jamesmacysanborn on March 04, 2012, 06:11:02 AM
I have 5 days left on a module I bid for on ebay. If I don't win, I'm in! Not likely that I'll win sense I only bid 70 bucks. I would rather have this new system. Will I need one or two to convert the system over?
an ignitech tcip4 or something else?
yeah, the TCIP4 handles both units.
I got off the used mod on ebay so I'm in! What's next?
Did I mention you suck? I bought mine week ago, thinking the 900 would be running.
My TCPI4 sits on the bike, waiting for me to finish it.
You suck.
But I take that all back when you accept my order for a aluminum s4r tank for my 07' monster.
Bah. >:( [roll] ;D ??? :-[ :-\ :-\ [thumbsup] [cheeky]
Quote from: TAftonomos on March 04, 2012, 08:43:21 PM
Did I mention you suck? I bought mine week ago, thinking the 900 would be running.
My TCPI4 sits on the bike, waiting for me to finish it.
You suck.
But I take that all back when you accept my order for a aluminum s4r tank for my 07' monster.
Bah. >:( [roll] ;D ??? :-[ :-\ :-\ [thumbsup] [cheeky]
Sorry, I had this group buy thing posted a while back..
ignitech group buy
If you emailed me about getting one, and you're not here, drop me a line , I get brainfade now and then..
ME -2 Kokusan
Pepe -1 kokusan
gwjcat -1 KKsan
xcaptainbloodx -1 KKsan
speedog -1 KKsan
jamesmacysanborn -1 KKSAN
Dan -2 KKSAN
Other lists:
5 definite (all Bosch models)
13 sold so far.
I am also ordering some pickups from them, they are cheap. If you want replacement Kokusan or Bevel pickups, the discounted price is about €12 each (24 for a pair).
Anyone in for an IgniJet? Everything is at the discounted price, which is about 30% off the sale price (or more, I haven't looked at their current retail)
The plan is to send out requests for a deposit on or about the 10th and hopefully everyone will reply by the 15th and then order right away.
If you haven't send me your name and email, do so now but I think I have everyone above.
One more week.
Requests for deposits go out soon.
Deposit will be $25. That's roughly a 20% deposit.
Total per unit:
€93.50 (as of today xe.com says that is $122.761)
€9.20 ($12.08 - shipping from europe to me - including customs fee)
$8.05 (shipping from me to you --- USPS priority flat rate + $200 insurance + confirmation)
Subtotal $142.89 (based on today's foreign exchange rate from xe.com)
3% paypal exchange fee (this is the payment TO them from me since it is going to Czech republic)
= YOUR GRAND total (based on today's exchange rate) to your door:
= $147.18
A couple of caveats:
1. When you send me paypal payments, you need to eat the cost of the transfer. Send me the payment as a gift, which means you pay the exchange.
2. I need you to send the deposit ASAP when I request it. If you want, you can send a money order to me by mail, but I prefer Paypal for the deposit. For the balance, you can send a check or money order instead of paypal to avoid the paypal fee (it's like 3%)
3. I can't avoid the foreign exchange fee. Paypal socks it to you for sending money overseas even if you send it in dollars. I will be paying the balance out of my check account so I won't have bank fees too, but the paypal exchange fee is unavoidable.
I'll buy another one! I have whatever are the stock ignition modules on the 95, the KJKHSAKDUAHSKDHASKDHN something ones.
I'll pay you in euro! [cheeky] [laugh]
Just for clarity, their pricing does not include VAT, right?
Quote from: The Mad King Pepe' on March 07, 2012, 01:29:44 PM
I'll pay you in euro! [cheeky] [laugh]
Just for clarity, their pricing does not include VAT, right?
yes, that price excludes VAT. The price for ONE excl VAT is €120, and shipping for one unit is €20. total about $180 if you buy one alone and that doesn't include the foreign exchange fee for paypal, about $5.
I don't know if I can get the price any lower with more units, I'll post a final price when I order. It won't go UP, but it may go DOWN
'
Quote from: TAftonomos on March 07, 2012, 06:01:05 AM
I'll buy another one! I have whatever are the stock ignition modules on the 95, the KJKHSAKDUAHSKDHASKDHN something ones.
if you're serious, PM me your email
Ducatiz, you have PM
Making the order on 15-March. Any last requests or orders, PM me asap. Need to have your depost before March 15.
I have 22 sold as of today.
Last gasp.
23 sold as of today.
Have all but one deposit.
Order going out 15-March.
Ordering Tcip4 units, extra wiring, kokusan-replacement pickups, electrical connectors, etc.
going going going going gone...
did anyone go the ignijet?
anyone have experience with it? i understand it is a bit more expensive than the pcv but it reads to be a much better unit and i havent heard of it before this thread..
Quote from: Roaduser on March 13, 2012, 11:53:37 PM
did anyone go the ignijet?
anyone have experience with it? i understand it is a bit more expensive than the pcv but it reads to be a much better unit and i havent heard of it before this thread..
no one has ordered one from me.
i'm interested in them too, just not now.
http://www.kaemna.de/cms_en/katalog.htm?&view=artikel&artikel=2973 (http://www.kaemna.de/cms_en/katalog.htm?&view=artikel&artikel=2973)
this makes it even more tempting. ill spend some time tmr reading through the manual and playing with the software....
i want one but without some more info I'm hesitant to lay out the $$$. then again if i had of gone with your group buy it would have been significantly cheaper... [bang]
Quote from: Roaduser on March 14, 2012, 06:42:32 AM
http://www.kaemna.de/cms_en/katalog.htm?&view=artikel&artikel=2973 (http://www.kaemna.de/cms_en/katalog.htm?&view=artikel&artikel=2973)
this makes it even more tempting. ill spend some time tmr reading through the manual and playing with the software....
i want one but without some more info I'm hesitant to lay out the $$$. then again if i had of gone with your group buy it would have been significantly cheaper... [bang]
you have about 15 hours to decide, pm me if you want in
i have to check with them, but it looks like the discount price is ~~€560 for the Ignijet D (full version)
PM sent. I want one. Count me in please!!
Am interested. PM sent.
PM sent. Too late?
:-\
If those three stragglers can get their deposits in by 1:30 pm today, that is the last of the orders.
Locking this thread until further notice..