|
Title: 696 pipes on older monster Post by: mooml on July 19, 2011, 04:21:24 PM I've noticed the only thing about my 2003 m800 I don't like are the low pipes. Is there any way to convert an older monster to the higher exhaust like the 696 has without doing some major custom work?
Title: Re: 696 pipes on older monster Post by: Howie on July 19, 2011, 05:57:34 PM You could just buy a set of aftermarket high pipes for your Monster from any of our sponsors and bolt 'em right up.
Title: Re: 696 pipes on older monster Post by: mooml on July 20, 2011, 09:56:33 AM That would work, just not on my budget. I've noticed that 696 stock pipes go for pretty cheap which is why I was asking. Also why is there such a high demand for the 696 midpipe and almost none for the cans.
Title: Re: 696 pipes on older monster Post by: Slide Panda on July 20, 2011, 10:17:32 AM Sure they will fit... with enough cash.
But on a budget that precludes existing high-mount kits - doubtful unless you are an able fabricator. There's some signifigant differences from DSS monsters to the 696 Title: Re: 696 pipes on older monster Post by: Raux on July 20, 2011, 01:37:13 PM the 696 midpipe replaces the 796 and 1100 midpipes which have the exhaust valve in them. the 696 does not. hence with 696 midpipe and non-catalytic straight cans, you have a full open system.
|