Print Page - 4.5" Rear Wheel Measurement Help Needed

Title: 4.5" Rear Wheel Measurement Help Needed
Post by: JustDucky on July 25, 2011, 07:43:32 AM

Does anybody have a 4.5" wheel laying around they wouldn't mind getting some measurements from?

1.outside bearing to outside bearing including sprocket carrier (basically the total width of the hub assembly) If this measurement exceeds 8.75", #2 is irrelevant.

2.outside of sprocket to centerline of wheel

Any help would be greatly appreciated!

Title: Re: 4.5" Rear Wheel Measurement Help Needed
Post by: Speeddog on July 25, 2011, 11:27:54 AM

Approximately 8 3/8" from bearing on brake side of hub to spacer on sprocket side.

Approx 4 1/8" from outside of sprocket to centerline of wheel.

Title: Re: 4.5" Rear Wheel Measurement Help Needed
Post by: JustDucky on July 25, 2011, 06:45:29 PM

Fantastic. Thanks! [thumbsup]
Looks like I might be able to get a little ducati into my little fzr400. Now if I had just started this investigation a couple days earlier I could've hooked up with the one COPTZR just had for sale!

Title: Re: 4.5" Rear Wheel Measurement Help Needed
Post by: COP TZR on July 25, 2011, 09:55:52 PM

Quote from: JustDucky on July 25, 2011, 06:45:29 PM
Fantastic. Thanks! [thumbsup]
Looks like I might be able to get a little ducati into my little fzr400. Now if I had just started this investigation a couple days earlier I could've hooked up with the one COPTZR just had for sale!

No worries. If your running the larger axle, do a search on ebay. I've seen a few for sale with sprockets.

Ducati Monster Forum

Moto Board => Tech => Topic started by: JustDucky on July 25, 2011, 07:43:32 AM