I am re-isntalling my exhaust with some new gaskets. In the attached photo you can see that one side is completely flush (left gasket in photo) and one side has a groove/bump (right gasket in photo). Which way goes toward the engine and which way goes toward the exhaust? Thanks much!
(http://i1036.photobucket.com/albums/a447/AgentBetlog/Gasket.jpg)
It doesn't matter.
After you tighten the nuts for the header the gasket doesn't care...it's flat. ;)
Quote from: ducpainter on July 25, 2011, 05:54:05 PM
It doesn't matter.
After you tighten the nuts for the header the gasket doesn't care...it's flat. ;)
Ah. I was thought that washers should have the sharper side mate to the engine-side. I was thinking something similar applied to these.