Anyone have one laying around that they're willing to loan me. I'll pay in beers. [drink]
Harbor Freight has'em for $7.99 with a coupon.
Quote from: Ducatician on July 29, 2011, 03:17:36 PM
Harbor Freight has'em for $7.99 with a coupon.
I'm cheap! [laugh]
and beers are $7.99 for 6. [drink]
Quote from: Ducatician on July 29, 2011, 03:17:36 PM
Harbor Freight has'em for $7.99 with a coupon.
link please?
Quote from: take risks on July 29, 2011, 03:46:47 PM
and beers are $7.99 for 6. [drink]
I'd rather spend the money on beer than on a tool I'll use once and then loose it somewhere. [cheeky]
Quote from: ducatiz on July 29, 2011, 03:50:25 PM
link please?
No link. It's a real honest to goodness paper coupon...page 25 of the September 2011 issue of Motorcyclist (which I got free), top left corner.
You can use the code (26863472) online but have to pay shipping. Limit 9. Exp 12/2/11. I'm planning to pick one up if others want one and don't have the coupon...just chime in til 8 are spoken for.
They also have:
item 45341 safety wire twister 7.99 coupon 37944238
item 97841 moto stand/wheel chock 39.99 coupon 86345071
I might hit you up for the tool and wire twister.
I think Ted has one.
Guys those things are going to last you about 1/10 of one job. I've had them, and they're junk! The pin was crooked, the tip of it wasn't flat, the handle wouldn't thread into the body (cast) . For 7.99 I'm sure you'll try it anyways, and I can't blame you. I did. But ye be warned
Quote from: DRKWNG on July 29, 2011, 06:19:32 PM
I think Ted has one.
That I do and it's a decent one, not the Harbor Freight junk. I picked up that one, and it is an ok breaker but you can't use it to rivet anything.
Quote from: Artful on July 29, 2011, 08:10:05 PM
That I do and it's a decent one, not the Harbor Freight junk. I picked up that one, and it is an ok breaker but you can't use it to rivet anything.
In depth chain installation replacement rivet tool cheap harbor freight 530 motorcycle (http://www.youtube.com/watch?v=3gSuYTz2msE#normal)
Quote from: Ducatician on July 30, 2011, 03:43:28 AM
In depth chain installation replacement rivet tool cheap harbor freight 530 motorcycle (http://www.youtube.com/watch?v=3gSuYTz2msE#normal)
so it works if you do it right? ;D
Quote from: ducatiz on July 30, 2011, 03:47:49 AM
so it works if you do it right? ;D
That's what Al Gore told me... [laugh]
Quote from: Ducatician on July 30, 2011, 03:43:28 AM
In depth chain installation replacement rivet tool cheap harbor freight 530 motorcycle (http://www.youtube.com/watch?v=3gSuYTz2msE#normal)
I can find a video on youtube of a unicorn farting rainbows and I would still think that's more likely than seeing an HF chain tool work in the real world.
Quote from: Artful on July 30, 2011, 06:59:46 AM
I can find a video on youtube of a unicorn farting rainbows and I would still think that's more likely than seeing an HF chain tool work in the real world.
Chief Cheap Ass and I are determined to make this work!
And Lieutenant Lowball reporting for doody!
Well Sargeant Skeptic will be waiting with bated breath.
With his nice chain tool.
lol...
Is there a Colonel Costcutter lurking?
I actually picked mine up at Cycle Gear in DE. I was buying my Shoei and they had them on the counter, marked down to $20 from $120. Almost picked up two.
Quote from: Artful on July 30, 2011, 09:14:03 AM
I actually picked mine up at Cycle Gear in DE. I was buying my Shoei and they had them on the counter, marked down to $20 from $120. Almost picked up two.
well, look who is the Major Markdown
Quote from: Artful on July 30, 2011, 06:59:46 AM
I can find a video on youtube of a unicorn farting rainbows and I would still think that's more likely than seeing an HF chain tool work in the real world.
I wonder where that idea came from... [laugh]
(http://codeherrings.com/images/moto/ducati/funny/unicorn_monster.jpg)
So, I've got one... not sure if it's still needed since this thread spun off track so badly
Yes, jokes aside I'm still intereseted. PM me when you're available and I'll come pick it up.
Quote from: Sad Panda on August 01, 2011, 05:22:09 AM
So, I've got one... not sure if it's still needed since this thread spun off track so badly
Quote from: Sad Panda on August 01, 2011, 05:22:09 AM
So, I've got one... not sure if it's still needed since this thread spun off track so badly
What do you mean spun off track? Chain riveters and rainbow farting unicorns are first cousins. [laugh]
I got my cheapo bead breaker and chain popper from Ducatician and have already removed a tire in record time and removed a chain (a big ass 530) off my project bike.
Next, I will be using my cheapass 10 year old harbor freight air compressor to run my costcutter 6 year old harbor freight media blaster to remove the paint from the Oscam wheels to prep them for powder coating.
No you won't. It's broke. Seriously, go look right now.
Just did. Works like a champ. I changed the harbor freight line filter and used my harbor freight swivel and 100' line with the harbor freight QD connectors. Perfection!
....and I have money left for some magnesium wheels and hookers and blow.
(http://cdn3.knowyourmeme.com/i/000/103/256/original/i-make%20the%20beast%20with%20two%20backsing-love-cocaine.jpg)
Quote from: DRKWNG on August 04, 2011, 06:13:58 PM
(http://cdn3.knowyourmeme.com/i/000/103/256/original/i-make%20the%20beast%20with%20two%20backsing-love-cocaine.jpg)
i love that meme! [laugh]