|
Title: Risers for Ducati Monster 696 (2009) Post by: majello on August 05, 2011, 09:08:09 PM Hey guys,
I just ordered the 1.5 inch risers for my duc 696 (see here http://compare.ebay.com/like/160623483156?var=lv<yp=AllFixedPriceItemTypes&var=sbar&_lwgsi=y (http://compare.ebay.com/like/160623483156?var=lv<yp=AllFixedPriceItemTypes&var=sbar&_lwgsi=y)). I wonder if anybody has any experience with it. Is it simple to mount it ? E.g. do I have unscrew/screw 4 screws? of there is any cable that needs to be rearranged or holes to be drilled. Your experience would be valuable! thanks Marco Title: Re: Risers for Ducati Monster 696 (2009) Post by: TWDucfan on August 05, 2011, 09:36:07 PM I am interested to know as well. [Dolph]
Title: Re: Risers for Ducati Monster 696 (2009) Post by: justinrhenry on August 06, 2011, 06:25:18 AM i've never put risers on a 696, but i have on other bikes. in my experience it's just unscrewing and screwing. no wire adjustments should be necessary unless you purchased some ape hanger risers.
Title: Re: Risers for Ducati Monster 696 (2009) Post by: Dave R on August 06, 2011, 07:16:49 AM that is a stock Ducati part from a 2010/11 model. We've installed a few, fairly straight forward, put a rag on your tank to protect it, loosen clamps and remove bolts then replace with new pieces.
Title: Re: Risers for Ducati Monster 696 (2009) Post by: TWDucfan on August 08, 2011, 01:16:57 AM Quote that is a stock Ducati part from a 2010/11 model. We've installed a few, fairly straight forward, Air intake recess on tank allow handle bar to make maximum turn. Will Raise the bar height by installing bar riser cause interference with tank? thanks. |