Print Page - Flea bay CNC Sprocket Covers

Title: Flea bay CNC Sprocket Covers
Post by: dan_t on August 21, 2011, 07:43:31 PM

Hi all,

Does anyone have any experience with these particular items (fit, quality etc)?

http://www.ebay.com.au/itm/Ducati-Sprocket-Cover-748-848-916-996-998-1098-1198-S2R-/250845878892?pt=Motorcycles_Parts_Accessories&hash=item3a67945a6c (http://www.ebay.com.au/itm/Ducati-Sprocket-Cover-748-848-916-996-998-1098-1198-S2R-/250845878892?pt=Motorcycles_Parts_Accessories&hash=item3a67945a6c)

They appear to be an almost exact rip off of the EVR ones, but at a fraction of the cost.

Title: Re: Flea bay CNC Sprocket Covers
Post by: DoWorkSon on August 21, 2011, 07:47:36 PM

Have one very similar on my bike... Fit/Finish is good... The anodizing sucked. Turned pink within a few weeks.. I just powdercoated it black and its been great ever since

Title: Re: Flea bay CNC Sprocket Covers
Post by: chiu on August 22, 2011, 06:47:51 AM

I have tried this one... can't fit on my M1100...Don't know why..
http://www.ebay.com/itm/Ducati-Monster-750-620-900-1000-CNC-Gold-Sprocket-Cover-/300589080441?pt=UK_Motorcycle_Parts&hash=item45fc815f79 (http://www.ebay.com/itm/Ducati-Monster-750-620-900-1000-CNC-Gold-Sprocket-Cover-/300589080441?pt=UK_Motorcycle_Parts&hash=item45fc815f79)

Title: Re: Flea bay CNC Sprocket Covers
Post by: Slide Panda on August 22, 2011, 07:45:22 AM

Quote from: chiu on August 22, 2011, 06:47:51 AM

Because they are for a 750, 620 ,900 etc. The engine case is different. Older monsters can share a lot of parts, as can newer. But mostly you won't be crossing the generation line

Title: Re: Flea bay CNC Sprocket Covers
Post by: ducatiz on August 22, 2011, 08:09:44 AM

I have bought stuff from the seller and he's a good guy. Returns are no problem. Email him with questions, he is very courteous.

Title: Re: Flea bay CNC Sprocket Covers
Post by: speedknot on August 23, 2011, 04:45:48 PM

+1 on the recommendation. I bought the black one for my bike. The only thing I didn't like was that it has a high gloss finish. It doesn't go with the rest of the flat black parts. I'll eventually spray it flat black.

Title: Re: Flea bay CNC Sprocket Covers
Post by: Mugen939 on August 25, 2011, 05:30:35 AM

Quote from: dan_t on August 21, 2011, 07:43:31 PM

I bought these for my Monster EVO and they didn't fit. Just an FYI.

Title: Re: Flea bay CNC Sprocket Covers
Post by: Heath on August 25, 2011, 07:11:31 AM

Quote from: Mugen939 on August 25, 2011, 05:30:35 AM

I bought these for my Monster EVO and they didn't fit. Just an FYI.

It doesn't list your bike on the list of bikes it will fit. Not sure why you would order it. He has another auction for the 696, 1100, 1100s. Again though no EVO is listed so I would be careful on ordering that one too.

Title: Re: Flea bay CNC Sprocket Covers
Post by: Mugen939 on August 25, 2011, 12:54:03 PM

It says all years monsters in the description. That's why I ordered it. Thought my monster fell under the category of "all years". [beer]

"Payment Options:
PayPal Only
Shipping & Handling:
Shipping is done Monday through Friday. If payment is taken before 2pm, your item will be shipped out the same day. We use USPS. Approximate delivery time is 2-3 business days for domestic. For global shipping, approximate delivery time is 5-15 business days.
Fitment:

●748 / 916 / 996 / 998 (all years)
●749 / 999 (all years)
●848 / 1098 / 1198 (all years)
●ST / SS / Multistrada (all years)
●851 / 888 (all years)
●ST2 / ST3 / ST4 / S4 / S2R/ S4R / 620 / 695 / Monster (all years)"

Ducati Monster Forum

Moto Board => Accessories & Mods => Topic started by: dan_t on August 21, 2011, 07:43:31 PM