|
Title: Turn Signal Bracket For Tail-Chopped Monsters Post by: bond0087 on August 24, 2011, 09:44:11 PM The previous owner did a tail chop on my bike, but did so with a kit that doesn't include anything for mounting turn signals. He just rode without them, but I wasn't about to do that, so I designed and made a pair of brackets that allowed me to mount the stock turn signals. The design is really simple, but I included measurements for where the holes need to be and the hole sizes which are accurate, so hopefully that's helpful to those without electronic calipers, etc. for measurement. See the pdf write up that I threw together for a drawing of the design and some pictures along the way.
Here's the result: (http://www.mediafire.com/imgbnc.php/b0e7085bdcffbc0d0524ef1481b45643753e7a9c5a95d7961e52a3beb52ac2e32g.jpg) (http://www.mediafire.com/imageview.php?quickkey=77x55rdb76pl3ib&thumb=5) PDF Write Up (http://www.mediafire.com/file/02qxg52lklnkyd8/turnSignalBracket.pdf) |