Print Page - 98 monster wiring burning up

Title: 98 monster wiring burning up
Post by: lawmaster891 on August 30, 2011, 05:11:39 PM

my 98 monster 900 has burn up the wiring at the connection from the stator. i had replaced the wire once back in February because it had burnt up and it has now done it again. the voltage regulator is not bad i am getting good readings with my dmm while reving the engine with readings around 13.5 when revved. has anyone else had this problem or can help.
(http://i310.photobucket.com/albums/kk419/lawmaster891/2011-08-30_19-03-37_201.jpg)

Title: Re: 98 monster wiring burning up
Post by: ducpainter on August 30, 2011, 05:30:31 PM

lots of people have had issues with that connector.

Many just solder the connections.

Title: Re: 98 monster wiring burning up
Post by: lawmaster891 on August 30, 2011, 08:00:44 PM

thanks i did some searching and decided to solder the connections. Except i marked the wires when i cut the connectors and in the process of soldering my marks have disappeared. so now i need someone who can tell me how i find out which three stator wires connect with the regulator wires for all three are yellow.

Title: Re: 98 monster wiring burning up
Post by: Speeddog on August 30, 2011, 09:29:46 PM

You can connect the 3 yellow wires together in any combination, it doesn't matter.

Title: Re: 98 monster wiring burning up
Post by: lawmaster891 on August 31, 2011, 03:56:44 AM

alright thanks for the help

Title: Re: 98 monster wiring burning up
Post by: H-2 CHARLIE on August 31, 2011, 09:20:28 AM

use that silicone grease for any and all plugs . [clap]

Ducati Monster Forum

Moto Board => Tech => Topic started by: lawmaster891 on August 30, 2011, 05:11:39 PM