|
Title: S2R 800 + Ducshop Hyper stacks + PC3 + Emission canister removed Post by: Ohm3d on September 27, 2011, 07:55:36 PM Move pics to come.
(http://img.photobucket.com/albums/v128/b16n08/S2R/P1000378.jpg) (http://img.photobucket.com/albums/v128/b16n08/S2R/P1000368.jpg) (http://img.photobucket.com/albums/v128/b16n08/S2R/P1000369.jpg) small hose from air box now with K&N filter mounted above the oil cooler (http://img.photobucket.com/albums/v128/b16n08/S2R/P1000377.jpg) Relocated Main fuse and ign coil (coil was on the back side on the airbox) (http://img.photobucket.com/albums/v128/b16n08/S2R/P1000376.jpg) New big breather location, this was the hose that went to the charcoal canister (http://img.photobucket.com/albums/v128/b16n08/S2R/P1000375.jpg) Filters in (http://img.photobucket.com/albums/v128/b16n08/S2R/P1000372.jpg) Title: Re: S2R 800 + Ducshop Hyper stacks + PC3 + Emission canister removal Post by: Ohm3d on September 27, 2011, 07:56:42 PM Here is how the PC3 mounts (as suggested by Dynojet) ((not a fan))
(http://img.photobucket.com/albums/v128/b16n08/S2R/IMG_0459.jpg) Another look at PC3 and the empty space where the emissions canister was (http://img.photobucket.com/albums/v128/b16n08/S2R/IMG_0487.jpg) Title: Re: S2R 800 + Ducshop Hyper stacks + PC3 + Emission canister removal Post by: Ohm3d on September 27, 2011, 07:57:14 PM reserved for more pics
Title: Re: S2R 800 + Ducshop Hyper stacks + PC3 + Emission canister removal Post by: Ohm3d on September 27, 2011, 08:03:45 PM Took about 2 hours to do everything.
airbox and emission canister were super easy to remove, I think I spent most of the time putting smaller zipties on and relocating stuff. I didnt cut any of the hoses to the airbox or canister, I just rerouted them, in case I decided to put the stock airbox back in (which I won't) PC3 takes about 10minutes to install, I dont like their location of it and will be relocating it to under the fuel tank once I get a chance to get the bike on the dyno. again most of the time is spent on routing the wires. I loaded the 504 pc3 map and it runs a little rich, but not bad. Have to set the cold start a little higher when first starting, but once its warms up (like 2-3 min) it idles perfectly Riding impression... little less low end, mid range is nice, top end is definitely a lot different, placebo effect maybe, lol, but it "feels" better by a little.. The power comes on differently now so it will take a little getting used to, but still very predictable. The sound is unreal. It is loud.... I took a video, but the audio sucked when I loaded it on the comp, so I'm not gonna bother posting it up. I definitely have to wear ear plugs all the time now. I will post some more pics when I get a chance Title: Re: S2R 800 + Ducshop Hyper stacks + PC3 + Emission canister removed Post by: Heath on September 28, 2011, 04:52:30 AM Any plans to have it put on a dyno? Or have a custom map done?
Title: Re: S2R 800 + Ducshop Hyper stacks + PC3 + Emission canister removed Post by: Ohm3d on September 28, 2011, 02:35:19 PM i am waiting for my exhaust to come and then it is going for a dyno tune with custom map. If my exhaust actually gets here before it snows will be the deciding factor on when it gets dyno'd
Title: Re: S2R 800 + Ducshop Hyper stacks + PC3 + Emission canister removed Post by: Heath on September 28, 2011, 04:04:38 PM What exhaust are you going with?
Title: Re: S2R 800 + Ducshop Hyper stacks + PC3 + Emission canister removed Post by: Ohm3d on September 28, 2011, 04:07:41 PM competition werks
Title: Re: S2R 800 + Ducshop Hyper stacks + PC3 + Emission canister removed Post by: EEL on September 28, 2011, 09:48:20 PM You mean arrow w/ Competition werkes cans.
Title: Re: S2R 800 + Ducshop Hyper stacks + PC3 + Emission canister removed Post by: Ohm3d on September 29, 2011, 02:44:56 PM Indeed, the system is being made right now. Should see it in a few weeks (hopefully)
Title: Re: S2R 800 + Ducshop Hyper stacks + PC3 + Emission canister removed Post by: koko64 on September 29, 2011, 02:54:27 PM I like the look of those velocity stacks. Anything that will help the air make the corner... [thumbsup]
[popcorn] Title: Re: S2R 800 + Ducshop Hyper stacks + PC3 + Emission canister removed Post by: Ohm3d on October 04, 2011, 08:15:59 PM The ducshop Hyperstack kit is good because it comes with everything you need including the smaller filters, and adapters.
the instructions were for a Hypermotard, but it was still pretty easy to figure out what went where. Removing the emissions canister was not necessary, but I did it anyway. |