Am looking for torque values for a '97 M900. Did a search and the mod's were pointing peeps to this thread: http://www.ducatimonsterforum.org/index.php?topic=373.0 (http://www.ducatimonsterforum.org/index.php?topic=373.0) . This thread is showing torque values for a '91 - '96...what differences between those years and a '97? I do not have a manual - yet. Thanks.
The values in the 91-96 chart are close enough for your bike.
There is very little difference in the early models
Thanks. I did not see a torque value for the rear sprocket.
What is the torque value for the rear sprocket? Searching in another post, the OP had a 2000 M750...and the response = 34 ft/lbs. Is that correct/close enough? If not, what should it be torqued to?
Quote from: greenohawk69 on September 30, 2011, 10:56:52 AM
Thanks. I did not see a torque value for the rear sprocket.
What is the torque value for the rear sprocket? Searching in another post, the OP had a 2000 M750...and the response = 34 ft/lbs. Is that correct/close enough? If not, what should it be torqued to?
I use industry standards for fasteners if I can't find a published spec.
That number would be about right for a 10mm fastener... about 45nm
Is that the fastener size?
Thanks.
The nut needs a 22mm socket. Using the info you gave in the previous post and extrapolating...I get 99nM or ~ 73 ft/lbs for the 22mm nut.
That would be the axle nut, not the sprocket. 83Nm - 61 ft.lbs
Thanks.