Any info on how to remove and refit new clutch springs cap and bolts please I've rung two Allen keys and stopped and I might have to resort to easyouts to remove 1 of the old bolts so any help advice would be appreciated.
Yours lost in Ireland.
I used a Dremel to cut screwdriver slots - did all the bolts so subsequent removal will be easy.
Others have used a Torx drive driven into the rounded hole with some force.
Quote from: WTSDS on October 22, 2011, 04:38:20 PM
I used a Dremel to cut screwdriver slots - did all the bolts so subsequent removal will be easy.
Others have used a Torx drive driven into the rounded hole with some force.
Cheers I'll try that
Cheers WTSDS tried the torques method worked a treat I now have 6 shiny stainless springs and bolts fitted to the clutch.