I wanted something smaller, showing more frame. Actually I'd prefer plastic, but it's so much easier to cut into carbon so Jeff at MonsterParts sold me a pair of Carbonworld covers (along with a few other items....)
Tape them up, draw a pencil line, Dremel'ish cutting wheel, grind/sand, silicone mesh in place... finished.
(hoping the clear coat won't start going rough on the edges, in which case I'll hand coat them with epoxy)
(http://i329.photobucket.com/albums/l394/stopintime/Side%20covers/sidecover031.jpg)
(http://i329.photobucket.com/albums/l394/stopintime/Side%20covers/sidecover001.jpg)
(http://i329.photobucket.com/albums/l394/stopintime/Side%20covers/sidecover009.jpg)
(http://i329.photobucket.com/albums/l394/stopintime/Side%20covers/sidecover014.jpg)
(http://i329.photobucket.com/albums/l394/stopintime/Side%20covers/sidecover020.jpg)
(http://i329.photobucket.com/albums/l394/stopintime/Side%20covers/sidecover029.jpg)
Nice neat job. Looks very cool [thumbsup] [thumbsup]
IZ will be so proud of you too ;).
Quote from: ungeheuer on November 02, 2011, 12:51:39 PM
Nice neat job. Looks very cool [thumbsup] [thumbsup]
IZ will be so proud of you too ;).
It's my pay it forward to him, so he won't feel lonely.
Thanks!
Quote from: ungeheuer on November 02, 2011, 12:51:39 PM
IZ will be so proud of you too ;).
What does this have to do with the Pipe Mod?
Looks cool. I did my stock belt covers that way a couple of years back. Good job.
Quote from: Bick on November 02, 2011, 01:21:48 PM
What does this have to do with the Pipe Mod?
The IZ_ pictures?
Quote from: Nomad on November 03, 2011, 10:41:31 PM
The IZ_ pictures?
if only the pipemod had been blurred out...
nice dremel work, btw [thumbsup]
Quote from: teddy037.3 on November 05, 2011, 02:50:33 PM
if only the pipemod had been blurred out...
nice dremel work, btw [thumbsup]
Thanks!
The pipe ugliness isn't as bad live, but still not pretty :(
I've been through countless options, but nothing I've seen allows my feet this close to the pipes....
Custom CF instead of the rusty mesh maybe?
Quote from: stopintime on November 05, 2011, 03:34:30 PM
Thanks!
The pipe ugliness isn't as bad live, but still not pretty :(
I've been through countless options, but nothing I've seen allows my feet this close to the pipes....
Custom CF instead of the rusty mesh maybe?
I didn't mean
your pipes... I meant AZ's
pipemod *shudder*
can't recall where off the top of my head, but I know I've seen universal CF heat shields for pipes, they're the rectangular kind, with hose clamp looking things to fasten them to the pipe
Quote from: teddy037.3 on November 05, 2011, 03:47:17 PM
I didn't mean your pipes... I meant AZ's pipemod *shudder*
can't recall where off the top of my head, but I know I've seen universal CF heat shields for pipes, they're the rectangular kind, with hose clamp looking things to fasten them to the pipe
Seen them, but still a lot wider from the pipes + I'd need a curved one for the lower s-pipe.
looks great. i went with no side panels a while ago, but this is very stylish.
did you think about doing the same thing with the belt covers?
Quote from: hunduc on November 05, 2011, 04:21:12 PM
looks great. i went with no side panels a while ago, but this is very stylish.
did you think about doing the same thing with the belt covers?
Yes - those are next [thumbsup] Probably not the mesh though - I won't risk the mesh coming off.
so what's the plan? lexan windows maybe?
Quote from: hunduc on November 05, 2011, 04:36:59 PM
so what's the plan? lexan windows maybe?
Just plain open is my plan for now......
you saw that new thread in "general monster forum", right?
Quote from: stopintime on November 05, 2011, 03:56:20 PM
Seen them, but still a lot wider from the pipes + I'd need a curved one for the lower s-pipe.
ah, bummer... was there a problem with the CF ones that came with it?
or... exhaust wrap? ceramic coat?
hmmmm
Quote from: hunduc on November 05, 2011, 04:45:31 PM
you saw that new thread in "general monster forum", right?
Yes - I'm cutting the center section, leaving the side walls to protect against pebbles, water and falling clothing ;)
Quote from: teddy037.3 on November 05, 2011, 05:24:39 PM
ah, bummer... was there a problem with the CF ones that came with it?
or... exhaust wrap? ceramic coat?
hmmmm
That's exhaust wrap on there now.
I'll look into black wrap and maybe try to custom cut thin alu plates, drill several holes and bend to fit.
Quote from: stopintime on November 05, 2011, 11:39:12 PM
Yes - I'm cutting the center section, leaving the side walls to protect against pebbles, water and falling clothing ;)
NO!
while im certainty very opinionated, there are few mods that I will outright say NO to. by cutting the sides off the belt covers you make it easy for debris to get in, but hard to get out. ever drop a guitar pick in an acoustic guitar? same principal.
ive pulled TABLESPOONS of gravel out of similarly modded belt covers.
Quote from: xcaptainxbloodx on November 06, 2011, 02:57:18 PM
NO!
...............
ive pulled TABLESPOONS of gravel out of similarly modded belt covers.
(http://i329.photobucket.com/albums/l394/stopintime/17520Meiji.jpg)
Quote from: stopintime on November 06, 2011, 03:58:46 PM
(http://i329.photobucket.com/albums/l394/stopintime/17520Meiji.jpg)
[laugh] [laugh] [laugh]