|
Title: Touring bar for 620 monster Post by: darksideducati on January 02, 2012, 04:44:35 PM Hello I am a newbie to forum my Ducati and motorcycles. I started riding late last summer and fell in love with my lil duc. I installed bar risers but i would still like to bring the bars up and back I found a Ducati performance comfort set but it's for the 696 I also searched the forums and it seems everyone wants to go lower with thier bars. Thanks for any advice
The rookie Title: Re: Touring bar for 620 monster Post by: stopintime on January 02, 2012, 05:10:23 PM The Rizoma bars will probably be a little higher, but more importantly they point backwards more, sweep back.
Check if you think you have enough cables and hoses first. http://www.monsterparts.com/pc/MA001/Bars-Mirrors/MA001.html (http://www.monsterparts.com/pc/MA001/Bars-Mirrors/MA001.html) Title: Re: Touring bar for 620 monster Post by: darksideducati on January 02, 2012, 07:10:45 PM Will they work with the handlebar risers? How tough is it to drill the location holes
Title: Re: Touring bar for 620 monster Post by: stopintime on January 02, 2012, 07:45:55 PM They bolt on to the risers just like the ones you have.
Drilling holes on a round bar can be a challenge, but not too hard. Put some tape on, so the drill bit doesn't slip off at once. If you miss a few times - doesn't matter - the scars will be hidden under the electric switch controls. Title: Re: Touring bar for 620 monster Post by: zooom on January 03, 2012, 04:43:41 AM depending on what kind of ergonomics you need, you can potentially find something from Pro-Taper in both rise and sweep, but you'll more than likely need new hydraulic lines from Spiegler to accompany the change...
|