Hi guys,
My frame is littered with little mushroom shaped bits that have little plastic clips, which in turn support a cable tie that supports the wiring loom.
Only problem is they're falling apart one by one, and I can't for the life of me find a replacement.
Here's what the clip looks like:
(https://lh4.googleusercontent.com/-OdPYg-5m_zg/T3GY5t8QasI/AAAAAAAABD0/9TuGd5kx61Y/s1223/DSC_2900.jpg)
Here's what the little mushroom shaped mount on the frame looks like (please excuse my grotty bike):
(https://lh4.googleusercontent.com/-vsSYoXOZq4E/T3GY1WwNTKI/AAAAAAAABDs/pRYVR-W6Pts/s1223/DSC_2902.jpg)
And here's what the whole assembly looks like (complete with the crack that will soon enough cause the thing to come adrift):
(https://lh6.googleusercontent.com/-DZOgyrVr-DQ/T3GY-KBEWuI/AAAAAAAABD8/VNoCsxIjP60/s1223/DSC_2892.jpg)
If anyone has a part number for these (or better yet a source of the bloody annoying things in bulk) I'd be greatly appreciative.
take a dremel and take those nubs off the frame and just zip tie directly to it...or would that be too much work?
zip ties are the devil. I removed tons and managed to find alternate routing for all the wiring....
850.4.067.1A Clamp.
Parts catalogue says it takes 11.
'07 M695, on the frame page, drawing 30, Item 29.
~$2 each here in the states.
Ducati Omaha website parts lookup calls it "TUCKER FITTING 1000 MTS/03"
Google of that found me this site, which seems a bit handy as it's got listing of other bikes it came on, but curiously, not all.....
Perhaps other model parts lists don't call it that. :P
http://www.ducatimcparts.com/products/Clamp-TUCKER-FITTING-1000-MTS03/3499052/850.4.067.1A.html (http://www.ducatimcparts.com/products/Clamp-TUCKER-FITTING-1000-MTS03/3499052/850.4.067.1A.html)
Thanks Speeddog, you rock!