|
Title: Looking for brake ducts. Post by: Düb Lüv on April 07, 2012, 09:31:29 AM i've searched for a few days and haven't been able to find any good sites or leads. does anyone know where i can get some front brake ducts like the road racing ones?
(http://i181.photobucket.com/albums/x251/seusssandm/IMG_4928.jpg) Title: Re: Looking for brake ducts. Post by: Nottsbiker on April 07, 2012, 09:58:13 AM I've been looking for some of these for a while now but couldn't find any either net our second hand - there must be some gathering dust somewhere.
Title: Re: Looking for brake ducts. Post by: Nottsbiker on April 13, 2012, 02:02:56 PM Still not found any - I'm searching on Ebay here in the UK but no RR parts have surfaced at all :(
Title: Re: Looking for brake ducts. Post by: Raux on April 14, 2012, 04:59:05 AM ask ATOMemphis were he found his
Title: Re: Looking for brake ducts. Post by: Düb Lüv on April 14, 2012, 01:31:36 PM I haven't asked josh yet, but if I can't find any ill just make one.
Title: Re: Looking for brake ducts. Post by: stopintime on April 15, 2012, 01:31:26 PM Maybe...
http://www.zeta-racing.com/zcarbon/airscoop/index.html (http://www.zeta-racing.com/zcarbon/airscoop/index.html) Title: Re: Looking for brake ducts. Post by: junior varsity on April 16, 2012, 10:06:04 AM i scored mine on eBay... I haven't installed them any more than for a simple mockup though. They are back on the shelf for the time being while the rest of that bike is being worked on.
I should note that I still can't figure out what is the point of the hole on the bracket (by the caliper). It lines up to nothing, it 'roughly' fits into the groove between the pistons of the caliper, but there's certainly nothing there to mount it. It isn't usefully placed for safety wire. It doesn't line up with anything relevant on either the Brembo GP calipers or the OEM Brembo Goldlines. It doesn't line up whether I'm using 916 forks or OEM Monster forks (40mm mount). Thoughts? (https://lh3.googleusercontent.com/-i312HFIULhY/Tf_0gZeouKI/AAAAAAAAH3M/TFvllcxQtQw/s0-d/IMG_4739.jpg) Title: Re: Looking for brake ducts. Post by: stopintime on April 16, 2012, 10:51:02 AM Speedo cable thingy?
Title: Re: Looking for brake ducts. Post by: junior varsity on April 16, 2012, 10:55:13 AM is that the location of the pin for pads? Pin is on the top of the calipers, not the bottom. Speedo cable thingy? Its on both LH and RH brake air ducts. Makes no sense. The only thing holding the contraption to the fork is a single nut and washer on a longer axle pinch bolt. Title: Re: Looking for brake ducts. Post by: Raux on April 16, 2012, 10:57:28 AM yeah doh. saw that after I wrote it.
maybe the 40 vs 65mm mounts? Title: Re: Looking for brake ducts. Post by: junior varsity on April 16, 2012, 11:53:53 AM So that's what I was beginning to think, but still can't figure out how it would work with 65mm mounts - the hole is small.. RRRREAALLL small. Like m4 or m5 sized, certainly not M6 and no way M8.
My Monster has the 998 forks with ohlins innards, which has 65mm caliper mounts - I want to fit it up to see if it would work there, but its all busy down there already with the 65-to-40mm caliper adapters for the ISR 6-pots Title: Re: Looking for brake ducts. Post by: Düb Lüv on April 16, 2012, 12:20:26 PM I don't know if road racing made them as a universal fit but found this Japanese site
http://www.garuda.ws/roadracing/roadracing.html (http://www.garuda.ws/roadracing/roadracing.html) Title: Re: Looking for brake ducts. Post by: junior varsity on April 16, 2012, 12:25:33 PM looks like rubber bumper here:
(http://www.garuda.ws/images/roadracing-images/916/916-2.jpg) Title: Re: Looking for brake ducts. Post by: junior varsity on April 16, 2012, 12:26:06 PM (http://www.garuda.ws/images/roadracing-images/916/916-6.jpg)
|