Print Page - No chop tail install

Title: No chop tail install
Post by: Eldon on April 19, 2012, 05:51:46 AM

Anyone install a no chop tail on a 2007 s4r. I am trying to do one and the tail light hits the seat from going on. Anybody run into this.
Thanks

Title: Re: No chop tail install
Post by: Slide Panda on April 19, 2012, 06:19:52 AM

Put a couple washers under the seat post to give you a bit more space.

Title: Re: No chop tail install
Post by: Eldon on April 19, 2012, 09:14:03 AM

Thanks for the reply. Are talking about spacing the seat latch up with washers.
Thanks

Title: Re: No chop tail install
Post by: stopintime on April 19, 2012, 11:16:44 AM

I had the same issue.

Both metal parts mounts under the frame [thumbsup]

Title: Re: No chop tail install
Post by: Slide Panda on April 19, 2012, 11:19:59 AM

Either or both. You can add some washers under the post attached to the seat and under the latch mechanism on the frame.

Title: Re: No chop tail install
Post by: Eldon on April 19, 2012, 01:19:29 PM

Thanks for all replies I will try it tonight.

Ducati Monster Forum