hi :)
I was wandering if someone as a bleeder screw from the clutch slave cylinder laying around ? :-\
2 week ago I bleed the clutch and the bolt stayed in my hands :o [bang]
I call my Ducati dealer and he can't get one before 20 day's :'( and I can't seam to find it anywere on the web [roll]
[bow_down]
Motowheels has banjo bolts with bleeders. You should get it within a week.
Look under clutch parts.
Quote from: koko64 on July 18, 2012, 05:08:14 PM
Motowheels has banjo bolts with bleeders. You should get it within a week.
Look under clutch parts.
thank's for the tip [bow_down] At first glace I didn't find anyting but I'll take a closer look tomorow [thumbsup]
found it !!! the thig is ordered [thumbsup] tanks [bow_down] :)
:) ;D :D [laugh] [clap]
I love your accent. [beer]
You might look at the Yoyodyne website, too. They keep rebuild kits for Brembo masters and calipers, as well as parts like bleeder screws, bleeder covers, reservoirs, and other bits.
Good luck!
Cloner
ABQ, NM
just make sure you didnt buy the speed bleeder, they arent designed for empty systems, they are to be installed after you fully bleed it with a regular nipple.
Quote from: He Man on July 21, 2012, 03:53:49 PM
just make sure you didn't buy the speed bleeder, they aren't designed for empty systems, they are to be installed after you fully bleed it with a regular nipple.
oups !! didn't know that [bang]
I got SPIEGLER Speed Bleeder: M8 x 1.25
well considering that I will have to extrac the current screw.... all the fluid will be drained so I'll put this one after .... not entirely sure about the size of the bleeder to ( because the bolt is still on the bike ) ... will see .... [popcorn]
It will work, just bleed it as it is a regular bleeder screw until you build pressure.
How did it work out 100?
[popcorn]
Quote from: koko64 on July 26, 2012, 03:03:20 AM
How did it work out 100?
[popcorn]
I'm still waiting for it [roll] I'm supposed to have it by the end of the week [thumbsup]