Does anyone have the torque value(s) for the bolts that hold the oil cooler shrouds on the current gen Monsters? I assume they probably use thread locker as well.
Hand tight... probably 12-14.
It's not something like a brake caliper, steering head or similar where it's really important
all the plastic are pretty much hand tighten.
i only used mild thread locker on the front fender but dont even do that anymore, just check it when i was the bike
Thanks for the advice. I just swapped for a Euro-spec left oil cooler shroud/air deflector since I had the emissions canister removed. There did not appear to be any thread locker on the bolts, but I used a little anyway. The left side of the bike looks better now. :)