hi! I already have my 2 calipers, my line, and 2 rotors, but looking at them, I clean them up, now I can not tell which one was on the left hand and which was the one I bought... is there any problem if I mix them up?¿ actually now when putting them side by side it looks to me as they were both left or right, [popcorn] doesn't really matter... does it? thank you! [thumbsup]
It shouldn't matter
Stock Brembos, right? If there's a RH and a LH to those, I've done mixed them up a few times already... Like Ddan says, shouldn't matter.
There are "directional" rotors out there, like BrakeTech, Beringer, I believe Galfer. But the carrier pattern is not symmetric on these, it's a mirror image between LH and RH side instead of being identical between the pair. These are also labeled with an arrow on the carrier pointing in the direction of rotating (just like tires).
stock brembos they are ;D thank you very much!
Braking also has directional rotors. But they are marked
ok, just to let you know if any one is concerned about this too... on my 620ie 2002 rotors are mirrors and have no RH or LH... so right now I am gonna get me a 39.99 "LH" rotor instead of the 99.95 "RH"! [beer] of course this does not apply to any rotor just the OEM one's; will post pictures of it later!