|
Title: Bar end weights for a bar end mirror. Post by: freeclimbmtb on January 02, 2013, 07:54:28 AM Alright so I have the CRG Arrow bar end mirrors, which I love. Only problem is the pinch bolt that holds it on the bar end adaptor is wearing holes in my right hand glove from being on/off the throttle. Anyone have a suggestion for a different (possibly weighted) bar end that will let me keep these mirrors? Maybe just move the mirror clamp out 1/2" or so so my glove doesnt rub on it? ???
Title: Re: Bar end weights for a bar end mirror. Post by: kemorobbie on January 02, 2013, 04:12:02 PM Check out the Motovations bar ends. They are weighted and will push your mirrors out just enough I bet. That's what I am running without problems.
Title: Re: Bar end weights for a bar end mirror. Post by: freeclimbmtb on January 03, 2013, 03:59:08 AM Just took a look...those look like they will put the mirrors exactly where I have them, they just have a slider out on the end.
Motovation: (http://www.motovationusa.com/mvstore/images/unibe3.jpg) CRG: (http://www.motovationusa.com/mvstore/ProdImages/crgadp_lg.jpg) Looks to position the clamp in the same spot...the search is on! Title: Re: Bar end weights for a bar end mirror. Post by: Jimmy6tring on January 03, 2013, 10:45:32 AM I have an S4 which has solid bars which meant the CRG adapters wouldn't fit. I found the RhinoMoto adapters/sliders an easy solution and I'm happy with them. They're not weighted but they might give you a little more room on the end of your bar:
(http://farm8.staticflickr.com/7256/7450219242_29a26984b2.jpg) (http://www.flickr.com/photos/76941274@N04/7450219242/) IMG_0375 (http://www.flickr.com/photos/76941274@N04/7450219242/#) by jimmy6string (http://www.flickr.com/people/76941274@N04/), on Flickr http://www.e-securedsite.com/rhinomoto/store/myProducts.cfm?parentcategoryid=4%7CBarend%20Sliders%20and%20Mirrors&productID=126&showDetail=1&categoryID=91 (http://www.e-securedsite.com/rhinomoto/store/myProducts.cfm?parentcategoryid=4%7CBarend%20Sliders%20and%20Mirrors&productID=126&showDetail=1&categoryID=91)|Ducati%20Barend%20Sliders&vendoridtodisplay=0&filterFor=&collection=4%7CBarend%20Sliders%20and%20Mirrors Title: Re: Bar end weights for a bar end mirror. Post by: freeclimbmtb on January 03, 2013, 11:53:42 AM Now were talking.. thatll take some looking into.
Title: Re: Bar end weights for a bar end mirror. Post by: JEFF_H on January 03, 2013, 02:52:36 PM the rhinos are steel-bodied so they are a little heavier than the various alum ones.
you will need the flat shaped slider to fit with the CRG Arrows Title: Re: Bar end weights for a bar end mirror. Post by: freeclimbmtb on January 04, 2013, 03:50:27 AM the rhinos are steel-bodied so they are a little heavier than the various alum ones. you will need the flat shaped slider to fit with the CRG Arrows Good call. |