Ducati Monster Forum

Anybody know of a good one?

For what model year?

You're avatar shows what looks to be a 695.
If that's what it's for, the only easy solution I know is:
1. Termi shorty mated to S2R 800 headers

(http://t1.gstatic.com/images?q=tbn:ANd9GcRoJtnpxzOJC3hDBZs9UCQqmyxCVM0JgVTrKOpmwnrJSu7P7nceP_hjl8o)

2. QuatD box exhaust

(http://i42.photobucket.com/albums/e344/Motowheelscom/briansbike.jpg)

There's also boomtubes if you can find them and obviously a one off custom.

yeah the mechanic at my garage said there's a guy on ebay who sells custom 2-into-1 headers for the Monster, but I can't find it, maybe he's out of business

i thought maybe you guys would know.

you're saying the s2r 800 headers would do it though?

Find a welder and have him  do this

Ducati.ms (http://www.ducati.ms/forums/57-supersport/81269-my-2-into-1-exhaust-project.html)

I'm actually in the process of doing this myself to my 695

Multistrada 620 headers.  It should bolt right up to a DSS bike with only a little fiddling for the slip-on.  Lose the big can and have your favorite welder make a slip-on:
http://www.ebay.com/itm/06-Ducati-Multistrada-620-EXHAUST-MUFFLER-SYSTEM-/190676602526?pt=Motorcycles_Parts_Accessories&vxp=mtr&hash=item2c65360e9e (http://www.ebay.com/itm/06-Ducati-Multistrada-620-EXHAUST-MUFFLER-SYSTEM-/190676602526?pt=Motorcycles_Parts_Accessories&vxp=mtr&hash=item2c65360e9e)

might require rear-sets...

Good find JohnEE.

I like what they did in that mod.  8)

STOP.  Neither a Multi exhaust or an S2R exhaust will fit onto a 695.  The vertical pipe through the swingarm is in a different location.

Best bolt-on options:  Quat-D ex-box, Boom-Tubes, or a custom system.

Fair enough.  I stand corrected.

I know the vertical head pipe is slightly different between the S2R and the Multi, I just assumed the swingarms were more similar between the DSS Multi and the DSS bikes than between the Multi and the S2R.  I neglected to factor in the Ducati-ness...   :-[ [Dolph]

And the OP did ask for a kit...

I'm just asking for some knowledge, my mechanic said there is a guy selling them custom online, and he showed me a bike in the shop that had the setup, so I know he isn't BS'ing.

Any 2-into-1 exhaust for a Monster (non-S2R) for the following engines will work on your 695:

600
620
750
800

Ducati performance used to sell a 2-into-1 for the M750 but they didn't sell too well & are hard to come by these days.

good thing you mentioned that.

not sure why, but i was thinking he was intending a single sided exhaust for a SSS mod. weird.

The guy that did this also did it for me. I sent the header to him and he sent it back.  Contact him and see, all he wanted was the dyno result so he can learn.

All in all I like it for the look, but I guess since I didn't get it tune right so it runs kinda weird.
My bike is a 750. My recommendation is not to do it hahaha.

What fuel and airs mods have you done, if any? Now I'm curious.

I'm not very technical so excuse my terminology.

Prior to the 2-1 I had installed new jet kit, factory pro with KN pod filters. I always run on superb gasoline.  Think of it, it wasn't that bad but I felt like I loss a bit of power comparing to the 2-2. Again, I'm telling all this base on my observations, not back by any dyno results or anything in that matter.