|
Title: Seat Installation Issues with Ducati Performance Touring on 696 Post by: PhillipLee on January 23, 2013, 06:43:57 PM Hello,
I have a 2010 696 and just bought the Ducati Touring Seat for it. It doesn't fit well at all and is almost impossible to get the seat latch to catch. I tried to adjust the release mechanism to no avail. The seat won't lay down like the stock one did. The seat pans look identical so not sure what is happening. It seems the seat is binding somewhere but I can't tell where. I am able to get the seat mechanism to engage but only after putting excess pressure on the seat. After that the key doesn't release the seat without some serious coaxing. Anyone have this issue and, if so, how did you rectify it? Thank You Title: Re: Seat Installation Issues with Ducati Performance Touring on 696 Post by: Speeddog on January 23, 2013, 08:22:36 PM I don't have a 696 at hand, but on earlier models a couple of washers under the latch can fix that issue.
Title: Re: Seat Installation Issues with Ducati Performance Touring on 696 Post by: JEFF_H on January 24, 2013, 10:35:45 AM sometimes its tough to get the slots in the front seated when the seat is new and stiff
Title: Re: Seat Installation Issues with Ducati Performance Touring on 696 Post by: danaid on January 24, 2013, 11:11:01 AM sometimes its tough to get the slots in the front seated when the seat is new and stiff +1 Mine wouldn't latch easily at first, I greased the latch and over time it fell into place like the origional. Title: Re: Seat Installation Issues with Ducati Performance Touring on 696 Post by: Raux on January 25, 2013, 12:25:05 AM you can move the latch a bit to help
Title: Re: Seat Installation Issues with Ducati Performance Touring on 696 Post by: bob795 on January 25, 2013, 02:53:55 AM I have 795, and DP comfort touring seat.
It was hard/difficult when the seat was new, the very first time I put it on the bike I thought I received a wrong seat... but it became easy after a while. |