Title: Battery Tender Post by: MsTek on January 27, 2013, 01:20:44 PM Apologies if this is in the wrong place. Mod, please move if needed.
So I am a bad owner. My bike has been sitting in the garage and not ridden for a very long time. For giggles I went in to see if the batter would kick over- it is lighting the gauges and all that fancy stuff but no juice to turn the engine over. The fact that it does light up bright leads me to think that if I can try to put this battery on a tender within the next two days, I'll be okay. I happen to have battery tender but I am not confident I won't burn down the garage I rent or damage the bike. I hear that I can keep the battery IN the bike and just connect the round connectors to the to power and then I don't have to take the battery out of the bike or off its own power. Is this true? Can I do this without burning down the garage? I rent this garage so I am going to have to unplug the automatic garage door thing and put in a power strip so I can connect the connector. I think I am smart enough to figure this out with a little guidance from the people here, if you would be so kind as to direct me. Just want to be sure I can ride as soon as it is warm, instead of being upset I didn't put the battery on the tender when I saw it was going to be bad. I think I can still save it... Help? :) Title: Re: Battery Tender Post by: skurvy on January 27, 2013, 06:32:46 PM You'll have no problems. I had my bike hooked up to a battery tender for about year and it didn't even pop a fuse, started right up.
Yes you can use the round connectors so the battery stays in the bike while hooked up. Just connect the round connectors to the +/- battery terminals, then the quick connector can be accessed through the frame. Then it plugs one way to the battery tender. I think the only problem you might have depends on how old the battery is, it might not hold a charge even if it gets recharged by the battery tender. I got 4 years out of my last battery and it sat for 1 year plugged to the tender. ffwd to 2:00 for the quick connector: How To Install A Battery Tender On A Motorcycle (http://www.youtube.com/watch?v=QZPnYoaDwac#) Title: Re: Battery Tender Post by: MsTek on January 30, 2013, 05:48:33 AM Thank you! :D
Title: Re: Battery Tender Post by: DuciD03 on January 13, 2014, 08:49:54 PM Soooo-dit work for ya?
I'm using a jr tender; works great; typically you'd like to keep a battery fully charged; topped up; or its hard to get it fully charged again. [Dolph] Cheers DD Title: Re: Battery Tender Post by: oldndumb on January 15, 2014, 06:18:54 AM I noticed that the video shows a BatteryTender installed on a Shorai battery. That is not the recommended charger for a LiFe battery because it will not allow a full charge.
http://shoraipower.com/faq (http://shoraipower.com/faq) |