Print Page - How do you remove swing arm from engine?

Title: How do you remove swing arm from engine?
Post by: 118811 on February 03, 2013, 01:52:33 PM

Hello
I have 1998 M900 engine with swing arm attach & wish to remove it?
I took off the pinch bolts from the bottom of swing arm....but figure out how to remove
the swing arm from this point?
Thanks

Title: Re: How do you remove swing arm from engine?
Post by: ducpainter on February 03, 2013, 02:25:31 PM

There are snap rings under the rubber plugs. Remove one and drive the pin out from that side with a drift.

Title: Re: How do you remove swing arm from engine?
Post by: Slide Panda on February 03, 2013, 03:19:58 PM

There may be spacer shims between the arm and the case. Keep track of which go with which side.

Title: Re: How do you remove swing arm from engine?
Post by: ducpainter on February 03, 2013, 03:37:26 PM

Quote from: Slide Panda on February 03, 2013, 03:19:58 PM
There may be spacer shims between the arm and the case. Keep track of which go with which side.

He's parting the bike. ;)

Title: Re: How do you remove swing arm from engine?
Post by: 118811 on February 03, 2013, 04:38:10 PM

Quote from: ducpainter on February 03, 2013, 02:25:31 PM
There are snap rings under the rubber plugs. Remove one and drive the pin out from that side with a drift.

Thanks
And thanks for the tip on checking "parts wanted" section!!!

Ducati Monster Forum

Moto Board => Tech => Topic started by: 118811 on February 03, 2013, 01:52:33 PM